- Home
- About Us
- Product Range
- ADEL SYSTEM
- Banner EngineeringThe worldwide leader in process and industrial automation
- Comitronic-BTIMachine Safety Components
- ESCHAConnectivity Solutions
- JungmichelDouble Sheet Detectors & more
- SIMEXData Loggers and Indicators
- SOLEXY WIRELESSHazardous Location Telemetry Equipment
- TURCKSense It! Connect It! Bus It! Solve It!
- RET's Core Products
- Latest News
- Contact Us
Call Us: +27 011 453 2468
Latest News from RET Automation Controls
L-GAGE® LTF Laser Measurement Sensor Provides Superior Durability and Precision Measurement
- Banner Engineering Sensor Product NewsPublished on 19/07/2016, 11:54
RET Automation Controls has expanded its family of L-GAGE® laser sensors with the new LTF Series. Featuring time-of-flight technology, the laser measurement sensor ensures accurate distance measurements out to 12 meters. By emitting a pulsed light, the LTF measures the amount of time for the light to reflect off the object and return to the sensor to calculate the distance. This enables sensing in long-range applications, including loop control, part presence or absence and fill level. The LTF offers the best-in-class combination of accuracy, repeatability and range. Designed with a Class 2 laser emitter with small, highly visible spot, the LTF provides easy sensor alignment and high excess gain. The same sensor that provides repeatability of less than 3 millimetres and accuracy of plus...
443
ADEL System - Flex Power Supply Units
- ADELSYSTEM Product NewsPublished on 19/07/2016, 11:50
RET Automation Controls stocks the complete ADEL System FLEX range of rail mount Power Supplies. FLEX power supplies are available with 1, 2 and 3-phase input, up to 600W, and with a continuous current rating ranging up to 25A. They easily supply power to demanding loads such as motors, solenoid valves and lamps. This is due to their "Power Boost" feature which allows them to supply 150% of their continuous current rating for up to 3 minutes at 60°C. The power supplies are able to operate in ambient temperatures between -25°C and 70°C and feature three modes for output protection - Hiccup Mode, Manual Reset and Continuous Output mode. The high performance offered by the FLEX range results in a significantly reduced footprint when compared to competitors power supplies which use...
386
Turck’s New ARGEE Technology Turns I/O Devices into Field Logic Controllers (FLCs) for Flexible, Cost-effective Control
- TURCK Fieldbus Technology Product NewsPublished on 25/05/2016, 11:33
Engineers, OEMs and integrators have struggled for years with how to balance the cost of PLCs with their I/O needs, and Turck’s new ARGEE technology solves this challenge. ARGEE empowers manufacturers to add logic to compatible I/O devices without a PLC, driving down the cost per I/O point and increasing flexibility in control.
The ARGEE environment is accessible via an HTML5-compatible web browser, which eliminates the need for complex third-party software or licensing common with PLCs. Inside the ARGEE environment, the user can set condition and action statements that can be carried out by the I/O device. The application’s intuitive design includes a flow chart, similar to ladder logic, which allows for easy programming by users of all experience levels.
By taking...
535
Turck presents RFID Device Control Center with integrated data processing for simple data control in Industry 4.0 applications
- TURCK Identification Systems Product NewsPublished on 25/05/2016, 11:25
At the Hannover Messe Turck, represented locally by RET Automation Controls is showcasing the TBEN-L-DCC – an intelligent RFID module with integrated data processing functions. The Device Control Center is optimally equipped for use in different Industry 4.0 scenarios in production and logistics, such as in incoming goods and dispatch areas, in the localisation of containers, order picking, or the control of goods flow.
The Device Control Center is based on Turck's robust TBEN-L RFID module platform with protection to IP67, and offers an additional eight freely definable inputs/outputs as well as connection possibilities for four RFID read/write heads in HF or UHF technology. Communication with higher-level ERP or MES systems is implemented via Ethernet TCP/IP.
The module is equipped...
361
RET Offers High-Pressure Resistant Sensors in M12
- TURCK Sensor Technology Product NewsPublished on 08/03/2016, 21:22
To keep up with advanced manufacturing technologies and the continuously shrinking sizes of applications, RET Automation Controls is introducing high-pressure inductive sensors in an M12 housing. Previously available in an M18 housing, the introduction of the M12 high-pressure sensor series allows RET to meet customers’ evolving needs. The new offering is available in two lengths, 78 mm and 56 mm.
“We heard from customers, particularly with hydraulics applications, that a more compact high-pressure sensing solution was needed,” said John Murphy, Product Manager at Turck. “The M12 high-pressure sensor provides an ideal solution for these applications without sacrificing any performance.”
The high-pressure M12 sensor series utilizes a robust stainless steel...
504
M12 Power Connectivity
- ESCHA Product NewsPublished on 08/03/2016, 21:14
As electronic devices are becoming increasingly more compact, customers are demanding compact power supply connectivity solutions. Most manufacturers tend to prefer the industry-proven M12x1-interface. ESCHA from RET Automation Controls has now developed a complete M12 portfolio providing reliable power transmission.
All components have been basically redesigned and meet the IP67, IP68 and IP69 requirements and thereby fulfilling UL 2237. Due to a connection cross-sectional area up to 2.5mm², the products allow for a large extension of power distribution; a further advantage – especially in case of DC-current distribution – is the slight voltage drop in contrast to the small cross-sectional area.
Two coding types have been developed for M12x1-power...
522
DF-G3 Fiber Amplifier Now Available With Analog Output to Satisfy Diverse Sensing Applications
- Banner Engineering Sensor Product NewsPublished on 08/03/2016, 21:09
Banner Engineering announces its long-range DF-G3 fiber amplifier is now available with analog output. With world-class long range sensing capability, the DF-G3 can sense more than 3 meters with opposed mode fibers or more than 1 meter with diffuse mode fibers. The extra power, combined with its new analog output, enables the DF-G3 to provide increased detection reliability for contrast matching, intensity monitoring, web guiding, process monitoring of signal intensity and dense sensing point environments. “We enhanced the DF-G3 fiber amplifier to include both an analog and digital output to solve more of our customer's applications,” said Dennis Smith, Senior Technical Marketing Manager, Banner Engineering. “With unmatched sensing power, convenient combination of both...
429
New RJ45 Patch Cords from RET
- ESCHA Product NewsPublished on 08/03/2016, 21:02
After their successful premiere at SPS IPC Drives 2015, as of now, new RJ45 patch cords from ESCHA are available. They are adapted for industrial applications (e.g. switch-cabinet wiring) as well as a structured building wiring.
To meet various customer needs, ESCHA has launched two new product lines: one with PVC-cable quality for CAT5e-applications and another with FRNC-cable quality for CAT6A-Applications respectively including four-pair AWG26-cables available in grey, black, yellow, red, blue, and green. On request, ESCHA supplies your individual lengths of 0.3 m to 50 m.
A characteristic feature of the new product series lies in the fact that its industrially proven- and overmolded RJ45 connectors can be combined with a fully shielded Ethernet cable. Despite this unique...
453
Self-Contained Photoelectric Sensors with Robust Stainless Steel Housing for Harsh Industrial Environments
- Banner Engineering Sensor Product NewsPublished on 10/02/2016, 11:21
RET Automation Controls introduces the new M18-4 self-contained photoelectric sensors from Banner Engineering. Featuring robust IP69K-rated 316 stainless steel housing, the heavy-duty 18 mm metal barrel sensor is ideal for harsh industrial environments where abrasive chemicals and ingress fluid are present. Built with Advanced ASIC (Application Specific Integrated Circuit) technology, the dc-operated M18-4 sensors are also resistant to fluorescent light and offer a high level of crosstalk avoidance.
Featuring a powerful and bright visible red emitter beam, the M18-4 allows for easy alignment and set-up. For added ease of use, the M18-4 sensor also offers a highly visible output, and dual-function power and stability indicators. The indicators are comprised of one green and two yellow LED...
386
Sure Cross® Wireless Controller Provides Superior Communication for Industrial Internet of Things Applications
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 10/02/2016, 11:11
Banner Engineering introduces the Sure Cross® DXM100 industrial wireless controller, designed to facilitate communications for Ethernet connectivity or Industrial Internet of Things (IIoT) applications. Available with an internal Sure Cross DX80 Wireless Gateway or a MultiHop Data Radio, this powerful Modbus communications device reliably connects local wireless networks with the Internet and/or host systems.
To satisfy multiple application requirements, the DXM100 controller offers several wired and wireless connectivity options to easily share data between local and remote equipment. The cellular modem option eliminates the need for IT infrastructures to connect remote equipment, while the integrated Sure Cross wireless radio option enables Modbus connectivity to equipment.
“By...
335
Solexy Wireless - The new RX Series Antenna Coupler
- SOLEXY Wireless Product NewsPublished on 10/01/2016, 20:28
Solexy Wireless from RET Automation Controls have released the new RX series antenna coupler, making it easier to use wireless products in hazardous areas. This unique design is the only barrier design that is Explosion Proof with an internal Intrinsically Safe Barrier, and allows you to use a standard passive antenna or a cable run to a remote antenna. No glands and no space inside the housing required. This barrier is mounted into the enclosure wall, providing the flame proof protection.
In one product :- explosion proof sealed fitting- intrinsically safe barrier- RF pass through
The Solexy RX series explosion proof and intrinsically safe RF Barriers are an integrated protection device that facilitates passive antenna installation in hazardous areas making the signal intrinsically...
405
R-GAGE™ Radar Dual-Zone Sensor Provides Superior Detection of Moving and Stationary Targets
- Banner Engineering Sensor Product NewsPublished on 10/01/2016, 20:22
Banner Engineering introduces a new Frequency Modulated Continuous Wave (FMCW) radar sensor for reliable detection of moving or stationary objects. Featuring a very narrow 11 by 13 degree beam pattern, the R-GAGE™ Q240 sensor is ideal for monitoring a specific area without detecting adjacent objects. With two independent adjustable sensing zones, the sensor provides far and near proximity warning signs with the capability to detect objects over 40 meters away.
“Our new R-GAGE Q240 sensor is extremely robust and provides reliable detection capabilities,” said, Brad Ragozzino, Technical Marketing Engineer, Banner Engineering. “Regardless of weather conditions such as wind, falling rain or snow, fog, humidity, air temperatures or light, the Q240 easily detects...
338
Banner Engineering DF-G3 Discrete Fiber Amplifier Features World-Class Long Range Sensing Capability
- Banner Engineering Sensor Product NewsPublished on 10/01/2016, 20:16
Banner Engineering introduces its DF-G3 discrete long-range fiber amplifier with dual digital displays for use with plastic and glass fiber optic assemblies. Featuring increased sensing power, the DF-G3 can sense more than 3 meters with opposed mode fibers or more than 1 meter with diffuse mode fibers. The extra power provides increased detection reliability for dark targets at long range and enhanced detection sensitivity when using specialty fiber assemblies for large area and small part detection applications.
The DF-G3 is available with a single discrete output or two dual discrete outputs. The dual discrete outputs can be independently taught to trigger at different intensity values, which is ideal for correct part-in-place or error-proofing, bottle down, and edge guiding...
228
Q4X Laser Sensor with IO-Link
- Banner Engineering Sensor Product NewsPublished on 10/01/2016, 20:10
The Q4X laser distance sensor from RET Automation Controls is now available with dual discrete outputs and IO-Link configuration. Dual discrete outputs enable the Q4X to solve challenging high/low monitoring fill level or dancer arms applications, while IO-Link allows for remote configuration, sensor backup and easier preventative maintenance.
The new Q4X dual channel sensor offers enhanced performance features, including window size and offset control for easier setup of difficult applications, totaliser to reduce PLC programming for high speed counting and pulse frequency modulation (PFM) output as an alternative to an analog output. Additionally, the IO-Link point-to-point serial communication protocol allows complete remote accessibility to device and event data and more precise,...
329
IO-LINK CAPABLE UPROX3 SENSORS
- TURCK Sensor Technology Product NewsPublished on 17/11/2015, 21:13
IO-Link makes Turck's uprox3 inductive proximity switch into a universal switch – including identification
Turck supplied locally by RET Automation Controls is now offering its flagship uprox3 sensor in an IO-Link-capable version. The intelligent interface makes the factor 1 inductive proximity switch a universal sensor that can be parameterised to suit over 100,000 individual requirements. For example, the two separately adjustable switching distances (each either NC or NO, as well as PNP or NPN) enable early warning functions to be set for targets subject to wear. The user can thus take action before a failure occurs. Various timer functions can also be set, for example an off-delay for speed monitoring. These options are already possible in I/O mode, in which the sensor can be...
327
Banner Engineering Introduces Simple, Rugged Safety Light Screen with Enhanced Performance Features
- Banner Engineering Machine Safety Product NewsPublished on 17/11/2015, 21:07
Banner Engineering has released the EZ-SCREEN® Light Screen (LS). This rugged, easy-to-use safety light screen is optimal for machine safeguarding and built to withstand challenging conditions found in manufacturing and packaging environments. With a lean, simple design and enhanced performance features, Banner’s EZ-SCREEN LS provides a cost-efficient light screen safety solution. The EZ-SCREEN LS features highly visible and intuitive bi-colour alignment indicators that allow for simplified setup, easy troubleshooting and streamlined installation. The end-to-end sensing design of the EZ-SCREEN LS eliminates gaps in detection when mounted on top of machine work surfaces and between cascaded segments. For added ease of use, the system requires no PC software, DIP switches or other...
359
FIRST CONTACTLESS IO-LINK ENCODER
- TURCK Sensor Technology Product NewsPublished on 17/11/2015, 21:04
At the SPS IPC Drives fair Turck is showcasing the first fully contactless encoder which outputs its measured value via IO-Link. This makes the QR24-IOL an inexpensive alternative to encoders with an analog interface. Users can connect the single turn encoder with a standard M12x1 male connector. Expensive shielded cables become unnecessary through the use of simple three-wire cables.
The combination with Turck's contactless measuring principle offers additional benefits. The zero point of the encoder can be selected as required – and can be set simply via IO-Link after mounting. It is thus no longer necessary to align the encoder optimally to its electrical connection and use correction factors for the zero point in the controller. The measuring range, the resolution and the...
807
Banner Engineering Rugged LED Strip Lights Solves Tough Lighting Applications in Harsh Environments
- Banner Engineering Lighting and Indicators Product NewsPublished on 17/11/2015, 20:59
Banner Engineering has released the WLS27 LED strip light. Featuring a durable aluminium internal structure and shatterproof, UV-stabilized, polycarbonate shell, WLS27 LED strip lights are ideal for harsh indoor and outdoor applications and resist exposure to high-pressure, high-temperature water, solvents, cutting oils and a broad range of chemicals. Designed with the same durable, low-profile design and efficiency as Banner’s work light strip family, WLS27 LED strip lights are optimal for use where laminar airflow is a requirement. To satisfy diverse applications, the WLS27 is available in eight lengths from 145 mm to 1130 mm and multiple colour illumination options, including single, dual and dimmable configurations. Colour options include cool white, warm white, red, green, blue...
283
TURCK's new IMX12 Series offers high signal density, speed, accuracy and flexibility
- TURCK Interface Technology Product NewsPublished on 21/10/2015, 16:59
Turck supplied locally by RET Automation Controls has released the IMX12 device series, a new generation of Ex isolated barriers and Ex analog signal isolators. With its compact and slim 12.5 mm housing, the device series offers maximum signal density. This now enables 2-channel temperature measuring amplifiers in 4-wire PT100 circuits to be implemented via up to four 2-pole terminals – each on the Ex and non-Ex side. Besides the signal density, the IMX12 devices stand out on account of their speed, accuracy and flexibility.The IMX12-DI isolating switching amplifier offers maximum values in terms of speed. Even input frequencies, which were previously the reserve of special frequency transducers, can be transferred reliably. With up to 15,000 Hz, measured values can be optimally resolved...
269
Self-Contained Photoelectric Sensors Now Available in Fixed-Field Sensing Mode
- Banner Engineering Sensor Product NewsPublished on 21/10/2015, 13:34
RET Automation Controls is now stocking the S18-2 compact photoelectric sensor series with fixed-field background suppression mode configurations. The compact, self-contained sensors provide up to six detection ranges from 30 to 200 mm to satisfy diverse cost-sensitive and high-volume applications.Featuring excellent optical design and an advanced electronic design, Banner’s S18-2 background suppression sensors are resistant to fluorescent light and offer a high level of crosstalk avoidance. With a small, bright red LED emitter beam, S18-2 sensors are easy to align to the target, and ensure very small shifts in the detection range caused by target colour variation.“The S18-2 optics are factory calibrated to one of six sensing ranges between 30 and 200 mm to ensure consistent...
289
Connectors for Industrial Ethernet
- ESCHA Product NewsPublished on 11/10/2015, 21:17
Recently, the demand for reliable data transmission between the harsh industrial environment and the office communication network has been increasing. ESCHA supplied by RET Automation Controls offer the appropriate connectivity components for this interface solution. These components include M12x1 round connectors, flanges, and built-in plugs with X-coding for the harsh environments experienced at the field level as well as RJ45-connectors for IT-wiring.
Connectors for the field level
The four-pair M12x1 round connectors for the field level are based on the 360° shielding concept developed by ESCHA. Thereby, the shield connection is effected through a reliable crimping with the shield housing and not through a crimped plug-connection on the cable. Therefore they meet...
346
Banner Engineering Q4X Laser Measurement Sensor Now Available in Analog Models
- Banner Engineering Sensor Product NewsPublished on 11/10/2015, 20:59
The Q4X lasers distance sensor from RET Automation Controls is now available with an analog output. Featuring 4-20mA and 0-10 V output options, the Q4X analog models expand the variety of applications Banner’s Q4X laser distance sensor can solve, including fill level indication, part positioning, roll diameter, loop control and thickness/height verification.
Providing continuous measurement and versatile sensing performance, Q4X analog sensors provide resolution as small as 0.15 mm and cover up to a 300 mm range. The sensors deliver reliable measurement regardless of colour or reflectivity of target object or background.
“While the original Q4X has become a problem solver for many of our customers’ challenging sensor applications, we discovered a need for an analog model to...
311
Banner Engineering Introduces Heavy-Duty Vantage Line Fiber Optics
- Banner Engineering Sensor Product NewsPublished on 11/10/2015, 20:44
RET Automation Controls introduces new heavy-duty Vantage Line fiber optics to complement its industry-leading fiber amplifier product family. Featuring a flexible 304 stainless steel tube, the polyethylene jacketed plastic fiber is protected from crushing or abrasion in harsh industrial environments.
To accommodate diverse applications, the heavy-duty Vantage Line plastic fibers are available in eight different models, four with opposed sensing mode and four with diffuse sensing mode, in one and twometer options. All heavy-duty fibers are compatible with Banner’s existing plastic fiber amplifiers, including the DF-G family.
“Our new heavy-duty vantage line of plastic fibers offer enhanced durability and stable performance at a cost effective price,” said Dennis Smith,...
238
Banner Engineering TL70 Wireless Tower Light Provides Reliable Remote Monitoring and Visual Status Indication
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 11/10/2015, 20:35
RET Automation Controls introduces the TL70 wireless tower light. Combining the company’s industry-recognised tower light family with its field-proven Sure Cross® wireless technology, the TL70 wireless tower light provides superior monitoring and visual status indication for remote applications, general and machine status, mobile call for parts, mobile work stations, threshold sensing and other applications where wired solutions are not cost-effective, practical or possible.
With a Banner Sure Cross wireless node built into the tower base, the TL70 offers two-way wireless communication to eliminate costly and time-consuming wiring requirements. The TL70 is available in 900 MHz or 2.4 GHz configurations, allowing them to be used with matching, standard Banner wireless...
300
Q4X Laser Distance Sensor with New Dual Mode Solves Clear Object Detection and Error-Proofing Applications
- Banner Engineering Sensor Product NewsPublished on 11/10/2015, 20:27
RET Automation Controls is now stocking the updated industry leading Q4X laser distance sensor with a new dual teach mode. Featuring new firmware, the Q4X dual teach mode sensor combines window thresholds on both target distance and target reflected intensity, allowing the Q4X to reliably solve difficult applications with ease. The Q4X can now detect clear objects without requiring a retro-reflector. Dual mode can be used to error-proof applications by ensuring that the correct colour part is located at the correct position.
Banner’s Q4X reliably detects distance changes as small as 1 mm and covers a 25 to 300 mm range. The sensor was already ideal for difficult distance-based sensing applications as it easily detects objects regardless of target surface reflectivity, including black...
226
Wireless Vibration and Temperature Sensor Provides Superior Machine Monitoring
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 09/07/2015, 11:17
RET Automation Controls is now offering a wireless vibration and temperature sensor. Designed to effectively monitor machines for increases in vibration and temperature, the sensor measures RMS velocity in millimeters per second or inches per second, and temperature. This enables the sensor to identify machine problems before they become too severe and cause additional damage or result in unplanned down time.
The sensor is optimised to work with 1-wire serial radio devices, such as Banner’s wireless Q45VT Node, the P6 Performance Node and the MultiHop M-H6 radio. Operators can easily set vibration thresholds based on the ISO 10816 standard. When a threshold has been exceeded, the wireless node can provide local indication, send the signal to a central location, and send the...
236
Q3X Laser Contrast Sensor with Fixed Background Suppression
- Banner Engineering Sensor Product NewsPublished on 09/07/2015, 11:16
RET Automation Controls is now stocking a version of the Q3X laser contrast sensor with fixed background suppression from Banner Engineering. Featuring contrast detection, plus fixed background suppression, the Q3X LD50 reliably detects targets within the desired sensing range while ignoring objects in the background.
Out of the box, the Q3X LD50 operates like a fixed-field laser sensor and detects targets within its 50 mm sensing range. However, the sensor can be programmed for low-contrast sensing within this range, while ignoring objects at least 60 mm away. This allows the sensor to accurately detect its target without background objects affecting its performance.
“With fixed background suppression, the Q3X overcomes the main problem of standard diffuse-mode sensors where objects in the...
238
Motion Detectors Provide Automated Light Switching
- Banner Engineering Lighting and Indicators Product NewsPublished on 09/07/2015, 11:14
RET Automation Controls introduces the WLS28-2MQ motion detector switch for automated lighting. Banner’s motion detector switches provide an efficient solution to automatically turn on or off the light in applications where a physical switch cannot be used or the placement of the switch is not useful.
Banner’s motion detector switches are available in two options, an in-line module or built-in motion detector for the company’s industry-recognised WLS28-2 LED Strip Light. The in-line module allows operators to place the motion detection switch away from the light, and can be used with any Banner dc voltage lights. The WLS28-2 with built-in motion detector models provide easy and fast installation in one place.
“The motion detection switch offers a simple, convenient lighting solution for...
257
WLB92 Industrial LED Light Bar Provides Bright, Even Light for Increased Productivity
- Banner Engineering Lighting and Indicators Product NewsPublished on 09/07/2015, 11:09
RET Automation Controls introduces the WLB92 industrial LED light bar from Banner Engineering. Featuring bright, high-quality and uniform light, the WLB92 is designed to increase worker productivity and ergonomics. With a rugged metal housing and shatterproof light cover, the WLB92 is optimal for a variety of industrial lighting applications including robotic work cell lighting and quality inspection, while having aesthetics suitable for an office environment.
The WLB92 LED light bar delivers a versatile lighting solution with models available in ac or dc voltage supply and multiple connection options, including ac quick disconnect and ac conduit. The WLB92 also features several mounting options, such as surface, swivel, snap and hanging brackets to accommodate diverse installation...
272
Safety Limit Switches Provide Superior Interlocking and Position Monitoring for Industrial Applications
- Banner Engineering Machine Safety Product NewsPublished on 09/07/2015, 10:02
Banner Engineering introduces its SI Series Safety Limit Switches, designed to effectively monitor the position of a wide variety of guards, gates, covers and other moveable machine fixtures and tooling. The SI Series is available in three models—SI-LM40, SI-LS31 and SI-LS83—offering various actuating systems, contact arrangements, housing and mounting configurations to satisfy diverse industrial applications.
Banner’s SI Series feature a limit-switch style, complying with Type 1 per ISO 14119 standards, with actuating elements integrated with the enclosure. Configured with a positive-opening design of the normally closed contacts, per IEC 60947-5-1 standards, these switches provide reliable monitoring regardless of environmental conditions and withstand any attempt to override the switch and...
230
MultiCon = Meter + Controller + Recorder + HMI in One Package - now with E-mail notification functionality
- Simex Product NewsPublished on 20/05/2015, 16:08
The Simex MultiCon series of devices are now equipped with an "E-mail notifications" system.
This system enables the sending of e-mails directly from the MultiCon and makes the device ideal for high-tech alarm and monitoring systems. Up to 32 different email messages can be defined by the user and the user can select the specific event which would trigger the sending of the message. The e-mail message will consist of the following elements: • topic and text of the message (both with fixed content)• an attachment containing momentary recorded values from the selected groups or the individual measurement channels in .csv format. Because the MultiCon supports secure logging (encrypted by TLS or SSL protocol), the account from which...
846
Expandable Compact Safety Controller
- Banner Engineering Machine Safety Product NewsPublished on 20/05/2015, 15:58
XS26-2 features Boolean logic for programming flexibility in a wide range of applications
RET introduces an expandable programmable safety controller featuring small footprint and Boolean logic for high efficiency and flexibility developed by RET’s Safety Partner Banner Engineering. The new XS26-2 Controller monitors numerous input devices including e-stop buttons, rope pulls, enabling devices, protective safety stops, interlocked guards or gates, optical sensors, two-hand controls, and safety mats.
A wide variety of options and configurations allows users to purchase only the capabilities they need, with ability to add on in the future. The base controller already offers 26 inputs and two dual safety outputs, allowing users to connect safety devices to a single controller instead of...
302
Contactless QR24 Encoder Speaks CANopen
- TURCK Sensor Technology Product NewsPublished on 20/05/2015, 15:53
Turck's QR24 inductive encoder series is now also available with a CANopen interface for mobile machines and industrial applicationsTurck has added a variant with a CANopen interface to its QR24 encoder series. The new wear-free QR24-CAN variant is ideally equipped for use in mobile machines. Short latency times as well as a cyclical and event-driven communication are only two of the many benefits of the CANopen protocol, which is frequently used in this application field. These applications include crane and lifting technology, transport systems, construction machinery and also special machine building. The first pilot customers are already using the new contactless encoder with the CANopen interface in the construction machinery and wind power sector.As with other QR24 models, the sensor and...
688
Banner Engineering Q4X Laser Distance Sensor Provides Superior Performance for Challenging Applications
- Banner Engineering Sensor Product NewsPublished on 19/04/2015, 16:31
Banner Engineering have released the Q4X laser distance sensor. Featuring superior, versatile sensing performance, the Q4X reliably detects distance changes as small as 1 mm and covers a 25 to 300 mm range across multiple target colors, materials and surfaces. With the ability to detect presence/absence of a target or an object’s orientation, the Q4X solves a variety of sensing applications.
The Q4X is optimal for difficult distance-based sensing applications as it easily detects objects regardless of target surface reflectivity, including black foam on black plastic, black rubber in front of metal, multicolor packaging and targets of all colors. Additionally, the sensor provides superior resistance to ambient light interference.
“The Q4X was designed to be a problem solver for our...
375
Robust Miniature Sensors
- TURCK Sensor Technology Product NewsPublished on 17/04/2015, 14:24
RET Automation Controls offers inductive miniature sensors with a permanently visible status LED in the active faceTurck has added the Q4,7 series of rectangular inductive sensors to its range of miniature sensors. These miniature sensors (16 x 8 x 4.7 millimeters) have been specially developed for applications in which they have to be fully embedded in metal, for example in press tools. These kinds of applications not only require robust sensors with large switching distances, but also require housings as small as possible to reduce the amount of surrounding metal which has to be removed to create the recesses. The Q4,7 meets all the requirements mentioned above namely a two millimeter switching distance, a robust metal housing, a highly flexible two meter connection cordset with an...
393
The Third Generation of Factor 1 Sensors
- TURCK Sensor Technology Product NewsPublished on 31/03/2015, 09:46
Turck has released the uprox3, the third generation of its range of uprox factor 1 sensors. Factor 1 sensors have the same switching distance for all metals. The electronic platform of the uprox3 Series has been completely redeveloped, resulting in switching distances being increased by upto 50%. Turck's uprox3 Series currently offers the largest switching distances of all factor 1 sensors on the market. The uprox3 Series, when mounted flush can attain a 3mm sensing distance in the M8 design, 6mm in the M12 design and 10mm in the M18 design. Due to the consistent development of its uprox technology, Turck has been able to achieve these larger switching distances without any compromises in terms of performance and mounting requirements. Turck has also managed to...
411
IO-Link Hub with 16 Universal Inputs/Outputs
- TURCK System Solutions Product NewsPublished on 31/03/2015, 09:41
Turck's IO-Link hub brings 16 incoming or outgoing digital signals to the controller via IO-Link. Each port of the TBIL-M1-16DXP can be used as an input or output without any configuration required. This makes the hub particularly suitable for applications which have to link many digital actuators and sensors in a restricted space, such as in pick-to-light systems. The I/O hub can also be used in combination with Turck's NIC inductive coupler, which can provide contactless data and energy transmission, for the wear-free connection of tool changers to sensors and actuators. The I/O hub even enables the unique identification of the tool without the use of RFID or barcodes. The PNP outputs of the hub are specified up to 0.5 A. The device functions as an IO-Link device (specification...
436
New iVu Plus Gen2 series includes resolution options to optimise speed & quality
- Banner Engineering Vision Sensors and Vision Lighting Product NewsPublished on 31/03/2015, 09:31
A new generation of vision and barcode sensors offering multiple tools and resolution options has been introduced by RET Automation Controls. The iVu Plus Gen2 line, developed by Banner Engineering, includes integral and remote screen models for use in a wide range of inspection, machine vision and quality control applications. The vision sensors with built-in illumination are designed to solve applications that would typically require multiple photoelectric or proximity sensors. They now include a full resolution option to detect small features, as well as the capability to use multiple sensor tools in the same inspection.
Bar code readers validate twelve 1D and 2D barcode formats to support advanced traceability in all industries. They offer a coarse mode resolution setting that can provide...
361
Easy identification options for connectors - Coloured rings and label carriers from ESCHA
- ESCHA Product NewsPublished on 31/03/2015, 09:12
In facilities and constrained work areas which have a high number of connectors, things can quickly get confusing. Where does the connector come from? Where does it lead to? Does the connector transmit data, signals or power? ESCHA, the German connector- and housing specialist provides two solutions: Coloured rings as well as label carriers for the clear marking of cables and connectors.The coloured rings are available in eleven colors and can easily be clipped onto the connector body of an M12x1 round connector or onto the cable of an RJ45 connector or onto a flange with an overmolded cable. ESCHA also offers four sizes of label carriers for applications where color coding is insufficient as more details have to be displayed on the cable. The label carriers are slipped...
466
Heavy-Duty Q3X Laser Contrast Sensor Solves Challenging Part-Detection Applications
- Banner Engineering Sensor Product NewsPublished on 13/03/2015, 05:26
Banner Engineering has released the Q3X laser contrast sensor. With the ability to detect up to 2,000 events per second, the Q3X provides high-speed, reliable detection of parts, tools, pallets or registration marks with small contrast differences. The Q3X has a small laser spot and is an excellent sensor for reliable part presence, tool-in-place or broken tool detection in stamping and machining centers.
Featuring speeds as fast as 250 μs and a sensing range up to 300 mm, the Q3X is ideal for high-speed packaging and detection applications of small targets, such as registration marks on packaging, or verifying placement of black gaskets and O-rings on machined metal parts.
“The Q3X was designed for precise detection in harsh environments,” said Dennis Smith, Technical Marketing Manager at...
495
Small-Scale Barrel Sensors Ideal for Tight Spaces
- TURCK Sensor Technology Product NewsPublished on 23/02/2015, 20:11
TURCK is proud to announce the addition of new 4mm and 5mm barrel sensors to its existing line-up. The new EG05K and EH04K are 15mm shorter than the standard EG05 and EH04, which allow the new offerings to be used in applications previously not possible. These more compact sensors will benefit the stamping industry, medical device manufacturing and any application where small sensors are a requirement.The EG05K and EH04K are housed in a stainless steel barrel and come with a high flex TPU cable that can withstand harsh applications, including those involving corrosive chemicals. Offering a 1mm sensing range and full flush mounting, the EG05K and EH04K reduce the chance of damage while still offering the sensing range demanded. The EG05K and EH04K come equipped with a high visibility LED to...
451
TURCK Adds Programmability to Compact Temperature Transmitters
- TURCK Sensor Technology Product NewsPublished on 23/02/2015, 20:03
To broaden the functionality of its temperature transmitters, TURCK expanded its TTM sensor line to include dynamic programmability and special features via IO-Link. These fully programmable sensors allow a user to program the temperature range required, rather than be constrained to specific ranges, for more specific temperature control. This new functionality also allows the sensor to be programmed and used as a temperature switch.The TTM sensor line includes several models, including remote-mount transmitters, transmitters with integral Class A RTDs (resistance temperature detector), as well as all stainless steel configurations to meet different measurement, space and material needs of applications. To eliminate problems associated with conventional transmitter assemblies, all of TURCK’s...
391
Ultra-Compact Block I/O for Analog Signals
- TURCK Fieldbus Technology Product NewsPublished on 22/01/2015, 11:20
Turck has added devices with universal analog in- and outputs to its TBEN-S series of Multiprotocol block I/O
Turck has added several ultra-compact Ethernet block I/O devices with four analog in- or outputs to its TBEN-S series. The analog inputs of the Multiprotocol Ethernet modules can process four different types of input signal: besides voltage and current signals, it also processes PT100 signals from temperature sensors or millivolt signals, as are typically output by thermocouples or measuring bridges. This enables the user to respond flexibly to the particular input signal requirements in the field. The TBEN-S series enables applications that previously required three different block module types to be implemented with just one.
The fully potted IP67 modules are slim with a width of...
515
Expandable Safety Controller Design is Exceptionally Flexible and Intuitive
- Banner Engineering Machine Safety Product NewsPublished on 22/01/2015, 11:12
Banner Engineering announces the XS26-2 expandable safety controller. With the capability to add up to eight expansion I/O modules, the XS26-2 platform was designed to easily adapt to diverse automation requirements and address a wide range of safeguarding applications. The base controller models have 26 input terminals, four terminals for two redundant safety PNP outputs and a USB connection for loading configurations. Base models are available with an optional on-board display or an embedded Ethernet IP/Modbus TCP capability for access to live I/O status and system diagnostics to assist in troubleshooting and commissioning.
“We know that control engineers and maintenance staff are required to do more with fewer resources and, as a result, value reliable, easy-to-use safety products,” said...
394
Encoder with User-Definable Pulse Counting
- TURCK Sensor Technology Product NewsPublished on 22/01/2015, 09:52
The new incremental version of Turck's contactless QR24 encoder can be set to individual requirements by software or teach adapter. Turck is now offering the incremental variant of its QR24 contactless encoder with pulse rates that can be defined by the customer. The user simply sets the number of pulses per revolution between 1 and 5,000 via the Pactware parameterization software. As before, the encoder can also be taught to one of the nine most common preset pulse rates using the Turck teach adapter.
The QR24 can thus be used as a universal incremental encoder, which effectively reduces the number of encoder variants that have to be kept in stock and allows more standardization. The right number of encoder pulses can be selected for each application so that a virtually unlimited...
449
Short Body Inductive Sensors
- TURCK Sensor Technology Product NewsPublished on 14/12/2014, 20:30
Turck's BI sensors combine compact lengths with straightforward fully flush mounting in all metals
Turck is offering inductive proximity sensors in compact designs with the BI series EH03, EG04, EH04K and EG05K, which have now been completely updated. With their reduced lengths of 22 to 15 mm, the new models are even better suited for use in restricted mounting conditions. The EH03 and EH04 smooth barrel devices are available with diameters of 3 and 4 millimeters, the EG04 and EG05 threaded barrel modules in M4 x 0.5 and M5 x 0.5.
All devices of the new BI series are short-circuit and reverse polarity protected. They are also provided with a yellow LED for switch status indication. The possibility for fully flush mounting and a standard 1 millimeter switching distance throughout allow the...
582
Capacitive Sensors with Single-Click Teach
- TURCK Sensor Technology Product NewsPublished on 27/11/2014, 13:57
Turck's BCT sensors offer maximum user friendliness with teach buttons and LED back end
Turck's next generation of capacitive sensors, the BCT series, which are primarily used for level measurement. Instead of using a potentiometer as before, the sensors can be taught for the relevant medium via a teach button. The BCT here automatically defines the switchpoint so that any deposits on the tank wall or contamination of the sensor cap does not cause any incorrect switching. A logical testing of the selected setting also prevents programming errors with difficult to detect media.
Turck offers the BCT series as a universal NO/NC contact in a cylindrical design as an M18 and M30 variant. This not only enables users to effectively reduce the number of device variants that have to be kept in stock...
599
New product - MultiPrint!
- Simex Product NewsPublished on 21/11/2014, 16:30
Another possibility has been added to the MultiCon line - The MultiPrint.
The MultiPrint gives to the user the possibility to generate print-outs of the current measurements at the position where the recorder is installed.
The main feautres of MultiPrint are:
communication with MultiCon using USB interface,
prints on thermal paper with a width of 57 mm,
the print-out consists of three basic parts:
the header – composed of .PNG image files and it can contain for instance your logo,
the content – the part which is generated at the time of printing and includes a table with current measurement results,
the footer –it is also composed of .PNG image files,
current measurement results can be printed on paper or onto adhesive labels,
resolution of the print-out is 204...
612
TL70 Modular Tower Light Provides Enhanced Customisation and In-the-Field Modification Capabilities
- Banner Engineering Lighting and Indicators Product NewsPublished on 11/11/2014, 09:35
Banner Engineering introduces the EZ-LIGHT™ TL70 modular tower light. Offering superior flexibility, the TL70 can be customised as needed, and allows for easy position changes in the field. The big, bright 70-mm tower features advanced LED drive technology, providing highly visible operator guidance and equipment status indication.
The tower light can display up to five colors—plus an audible alarm module—in one tower, which allows for multiple colors to be lit simultaneously. The loud 92 dB adjustable alarm offers four user-selectable tones, including pulsed, chirp, siren or continuous. For optimal performance, each light segment can be selected solid ON or flashing, and appears gray when off to eliminate false indication from ambient light.
“Our new TL70 modular tower light is one of the...
725
COMITRONIC-BTI: Innovative Products for Machine Safety
- Comitronic-BTI Product NewsPublished on 10/10/2014, 13:49
COMITRONIC-BTI has developed a new product range of safety switches ideally suited for hostile environments, especially the food processing industry. The mirror polished IP69K safety switches are made from 316L stainless steel, making them extremely robust and the most chemically resistant products available today. A 50cm pigtail cable allows you to place the M12 connector in a protected position and the indication LED is protected by the switches housing. The safety switches are laser etched and mechanically stamped, ensuring that all product and traceability information is permanently available. The above features ensure that COMITRONIC-BTI’s new range of safety switches is the best available on the market.
In addition to the standard products in this new...
1325
Multiprotocol Ethernet Block I/O
- TURCK Fieldbus Technology Product NewsPublished on 26/09/2014, 16:06
TURCK's new TBEN block I/Os are designed as multiprotocol devices that can be run in Profinet, Ethernet/IP and Modbus TCP networks due to their automatic protocol detection function. In Profinet and Ethernet/IP networks the modules also now support bus redundancy (MRP and DLR) as well as the fast startup (FSU and QC). The digital outputs of both device series have a switch output current of 2 A. This therefore reduces the stock-keeping of types with different output currents. All devices also support standard grounding concepts without any extensive modification required on the I/O module.These devices have an extended operating temperature from -40 to +70 °C. The TBEN (Ethernet) and TBDP (Profibus DP) module series can thus also be used in climatic zones and applications in which virtually...
784
LE250 Laser Sensor Delivers Highly Optimised Performance for Positioning and Measuring
- Banner Engineering Sensor Product NewsPublished on 26/09/2014, 11:20
Banner Engineering has expanded its L-Gage LE family of laser sensors with the new LE250. Optimised for measurements ranging from 100 mm to 400 mm, the LE250 features superior measurement precision and a small laser spot size.The sensor’s linear array allows for reliable detection and measurement across a wide range of difficult targets, from black rubber to shiny metal. With a resolution of 0.02 mm out to 250 mm and a resolution below 0.2 mm out to 400 mm, the LE250 provides the repeatability and accuracy for solving applications where precise dimensional measurements or positioning are needed.The LE250 also features a smaller spot size, approximately one millimeter, which is ideal for small part detection, and provides more consistent measurements for applications that present varying...
751
Connectors for Bus and Train applications
- ESCHA Product NewsPublished on 14/08/2014, 21:25
The German Connector and Housing specialist ESCHA has developed a completely new product range which is designed to cope with the typical requirements of Bus and Train manufacturers. The connectivity components will be launched at the international trade show Innotrans in Berlin from 23-26 September 2014 and will be available immediately thereafter.
Reliable on-board network systems have evolved into a decisive factor within the vehicle development on modern busses and trains. Efficient and robust networks provide for safety and passenger comfort. Complex subsystems (IEC 61375-3-4) supply the main server with real-time information via a high-performance base network (Backbone according to IEC 61375-2-5) and are a necessary requirement for the transnational European train traffic.
The...
923
Enhanced iVu Vision Sensor Series for Advanced Communication and Inspection Capabilities
- Banner Engineering Vision Sensors and Vision Lighting Product NewsPublished on 11/08/2014, 10:03
Banner Engineering announces the release of the iVu Plus TG Gen2 and iVu Plus BCR Gen2 vision sensor series. Designed from the company’s industry-recognized iVu Integrated Vision Sensor family, the Gen2 series offers faster response times and multiple inspection resolution choices.
Banner’s iVu Plus Gen2 touch screen vision sensors advance inspection performance with Ethernet connectivity and multiple inspection capability. Ethernet connectivity enables sensors to share inspection data directly with PLCs, PCs or other factory devices, making communications and control even easier on the plant floor.
“The iVu Plus Gen2 vision sensors are designed with the same intuitive interface and reliable functionality of the original iVu sensor, but now offer expanded inspection performance to solve a...
828
DF-G2 Fiber Optic Amplifier Features World’s Fastest 10 Microsecond Response Rate
- Banner Engineering Sensor Product NewsPublished on 30/07/2014, 19:38
Banner Engineering enhances its fiber optic sensors product line with the DF-G2 fiber optic amplifier. Boasting the world’s fastest response rate, the DF-G2 can achieve a 10-microsecond response time with 5-microsecond repeatability.
In addition to quick response rates, Banner’s DF-G2 provides an easy-to-read dual digital display for highly visible signal level and threshold values. Featuring an intuitive interface, the sensor ensures simple set-up and programming through displays and switches and buttons, or via remote input teach wire. The DF-G2 also offers complete user control, providing manipulation of all operating parameters, including switch point threshold, light operate or dark operate, various output timing functions, electronic gain level and sensor response speed.
“With...
1073
Multiprotocol Ethernet In-Cabinet, Block I/O Stations
- TURCK Fieldbus Technology Product NewsPublished on 26/06/2014, 12:15
TURCK is expanding its line of In-Cabinet, Block I/O stations with the addition of the FEN20 I/O stations for Industrial Ethernet. This station incorporates TURCK’s Industrial Ethernet multiprotocol technology into a fixed, economical, in-cabinet I/O product ideal for applications where digital I/O needs to be elevated to an Industrial Ethernet layer such as EtherNet/IP™, PROFINET® or Modbus TCP™. This first release in a family of FEN20 I/O stations is available with 16 configurable I/O, with power isolation between I/O zones, an embedded Ethernet switch to support a variety of application topologies. The station can be addressed via an external rotary switch or via a webserver which makes troubleshooting easier, quicker, and more cost effective. The FEN20 supports DHCP, LLDP, and includes...
1213
Shielded Y- and T-splitters from ESCHA
- ESCHA Product NewsPublished on 04/06/2014, 10:34
ESCHA have added shielded versions of the Y- and T-splitters to their product range. These products are suitable for communication applications in the fields of Profibus and CANopen as well as for all applications requiring shielded splitter solutions. The ports (male or female) can be arranged in a variety of configurations, giving you a number of options when configuring your 2-way junctions.
The entire portfolio is based on the patented 2SSK-Technology developed by ESCHA. This technology provides for a reliable and consistent 360°-shielding even with vibration and high mechanical stresses and contributes to the very compact splitter structure. The final overmould will additionally provide for the IP67 and IP69K protection class requirements.
Substitute for longer junction cables
With...
948
QR24 Contactless Encoders in Stainless Steel
- TURCK Sensor Technology Product NewsPublished on 01/06/2014, 17:33
Turck now offers its customers a robust stainless steel variant of the contactless, inductive encoder QR24. The new EQF24 variant of the wear-free encoder is suitable for use in the food industry as well as in many other applications. With the V4A stainless steel housing (1.4404) and the active surface made of PA12-GF30 plastic, the device withstands even aggressive chemicals and high pressures in the cleaning process. The new EQF24 is available with incremental output and SSI interface.
As with other QR24 models, the sensor and the positioning element of the encoder are fully encapsulated and designed as two independent and fully sealed units that can withstand vibration or shocks on the shaft. Wear-intensive ball bearings or seals, that lead to machine downtimes or long maintenance times...
990
SureCross Wireless Enables Flour Mill to Access Temperature Data during Thermal Remediation
- RET APPLICATION NEWSPublished on 30/05/2014, 13:49
SureCross Wireless Application Note
SureCross Wireless Enables Flour Mill to Access Temperature Data during Thermal Remediation
Customer Scenario The EPA has placed restrictions on the use of many fumigants citing a correlation between their use and ozone depletion. As an alternative, a large-scale flour mill performs three to four thermal remediations per year to eradicate flour beetles. The temperature inside the mill is brought up to 122° F (50° C). This is done gradually to minimize equipment and building strain caused by heat expansion. Once this temperature is reached it must be sustained throughout the entire mill for 24 - 36 hours to allow the heat to penetrate any crevices that might shelter the beetles. Failure to sustain a minimum of 122° F will undermine the effectiveness...
1779
Banner Wireless Enables Calculating Machine Run Time
- RET APPLICATION NEWSPublished on 30/05/2014, 13:38
SureCross Wireless Application Note
Banner Wireless Enables Calculating Machine Run Time
Customer Scenario During normal operation, operators load a welding machine with the frame components to be welded. The loaded parts enter a robot welding cell and a completed frame exits. The operators unload the completed frame and load more components in preparation for the next welding cycle.
ChallengeProduction goals were not being met. Operators blamed machine downtime for the failure to meet production goals and maintenance personnel blamed operators for working too slowly. To determine where the problem was, this facility needed to accurately measure and report machine run time back to a control location.
SolutionPLC logic added to the welding machine now turns on an output when the...
1012
Banner Wireless Enables Call for Parts/Call for Service
- RET APPLICATION NEWSPublished on 30/05/2014, 13:18
SureCross Wireless Application Note
Banner Wireless Enables Call for Parts/Call for Service
Customer ScenarioTo improve efficiency, assemblers at work stations need a way to call for parts and service that doesn’t involve them leaving their work stations. Getting parts more quickly would improve production efficiency, and using a system of remote indicators would let the supervisors to see the status of each work station, allowing the supervisors to fix production problems quickly and to collect production metrics.
ChallengeBecause the work cells were frequently reconfigured, physical I/O wiring was difficult and expensive. Some work cells are on the other side of the plant, making range is an issue for many wireless systems. A bidirectional I/O system was required because some work...
1060
Remote Machine Monitoring Allows Supervisors to Take Immediate Action
- RET APPLICATION NEWSPublished on 30/05/2014, 10:19
SureCross Wireless Application Note
Remote Machine Monitoring Allows Supervisors to Take Immediate Action
Customer Scenario Machines run out of parts or break down, causing significant delays. Reducing these delays and down time would increase production output. It was determined that all important machines and process should be monitored at a central location to allow supervisors to immediately address problems.
Challenge Wiring to each machine was too expensive and time consuming. Hard I/O wiring would also make it more difficult to reconfigure the plant layout, which is done periodically. The machines being monitored were in a variety of locations, some near the centralized area and some on the other side of the plant making range an issue for many wireless systems. In addition,...
819
Presence Detection on Rotating Lathe Turret
- RET APPLICATION NEWSPublished on 30/05/2014, 09:54
SureCross Wireless Application Note
Banner Wireless Enables Presence Detection on Rotating Lathe Turret
Customer ScenarioBetty Machine has been meeting and exceeding customer expectations in the manufacture of precision machine parts, CNC and screw machine products for over 60 Years. Attention to detail, accuracy and consistency are fundamentals embedded into the culture and processes established by Betty Machine.
ChallengePrecision machinery, an expert staff and high-quality raw materials are integral to the production processes at Betty Machine. As material is loaded into a lathe, the operator validates its position and alignment to prevent tooling damage, material loss and production slowdowns. Betty Machine wanted to improve process efficiency by automating this process. The solution...
1092
Calling for Parts - Furniture Manufacturer
- RET APPLICATION NEWSPublished on 30/05/2014, 08:45
SureCross Wireless Application Note
Calling for Parts - Furniture Manufacturer
Customer ScenarioA furniture manufacturer has four manufacturing lines: red,green, blue, and yellow. When a line is in need of parts, one of the operators flips a switch that turns on that line’s color on a tower light located centrally in the warehouse. One of the two forklift operators notices the signal tower light and retrieves parts for that line.Customer NeedA solution that:
Increases the forklift operator’s response time byputting the call for parts indicator on the forklift’s dashboard
Allows the forklift operator to acknowledge the request and eliminates redundant part deliveries by both operators
The ChallengeThis is a large facility and the forklift trucks are mobile, making a wired solution...
993
SOLEXY explosion proof antenna coupler
- SOLEXY Wireless Product NewsPublished on 18/05/2014, 13:59
RET is now stocking the AXN Explosion Proof / Intrinsically Safe Antenna Coupler
The Explosion-Proof Antenna Coupler permits the installation of most passive antennas in the following hazardous areas:
South Africa IA approval Zone 0 with explosive gas, vapor or mist
International Zone 0 with explosive gas, vapor or mist
North America Class I, Div. 1 (explosive gas or vapor)
United States MSHA-regulated coal mines
This coupler is designed to be used in with listed/certified explosion proof housings or conduit fittings. An integrated blocking circuit prevents potentially hazardous energy from reaching the antenna in case of radio, modem, or access point failure. It allows for antenna removal while in the hazardous areas. The coupler's robust and flexible...
1047
RET partners with Solexy Wireless
- Company NewsPublished on 18/05/2014, 13:50
RET Automation Controls is excited to announce that they are the official distributors of Solexy Wireless in Southern Africa. SOLEXY Wireless provide innovative technologies that efficiently allow for the safe integration and easy operation of radios and other electronic equipment in hazardous area rated environments. Main industries of applications are refineries, oil and gas rigs, chemical plants and mines. Give us a call to find our more.
1766
MultiCon as an Energy Meter
- RET APPLICATION NEWSPublished on 15/05/2014, 14:41
MultiCon Controller / Data Recorder used as an Energy Meter
MultiCon efficiency has been proven in various industry applications. In some branches, measurement of energy consumption is highly important. There is no need to invest in additional meters - that is where our multichannel controller/recorder comes in handy. Thanks to the transmitters available in our offer, you can easily change the voltage and current into standard automation signals. MultiCon can use a number of the built-in mathematical functions to easily calculate the balance and the existing energy consumption.
Link to the Multicon Product Range
972
Connectivity in Hygienic Design
- ESCHA Product NewsPublished on 15/05/2014, 14:19
The connector- and housing specialist ESCHA showed new connectivity components in ‚Hygienic Design‘ at the SPS IPC Drives 2013 in Nuremberg. The refined M8x1 and M12x1 ‘Food&Beverage‘ connector line is tailor-made for applications in the food- and beverage industry meeting all important requirements of this environment.
In the food industry, the specific requirements of machinery and plants by far exceed those of the classical machinery. The new ESCHA connectors in Hygienic Design can also be used in environments where they come in contact with food. Interactions between the materials and the food being processed are averted and high resistance to detergents is guaranteed.
Development benefits from past experience
The development of the new products is based on the extensive experience...
937
LE550 Laser Measurement Sensor
- Banner Engineering Sensor Product NewsPublished on 08/05/2014, 21:20
Banner Engineering introduces the new LE550-Laser-Measurement-Sensor/ LE550 laser sensor. Designed with linear array technology, the LE550 non-contact laser sensor provides high repeatability and accurate measurement for challenging targets ranging from shiny metal to black rubber. With easy, ready-to-use operation, the LE550 measures 100 mm to 1000 mm right out of the box—making it an ideal detection solution for diverse measurement applications, including roll diameter, loop control, thickness measurement and positioning.Featuring an intuitive two-line, eight-character display, the LE550 makes adjustments and menu navigation simple and easy to read. The visible red, Class 2 laser beam and small spot size ensure quick setup and alignment. The LE550 is also available with an optional metal,...
1101
Flexibly Positioned Flow Sensors
- TURCK Sensor Technology Product NewsPublished on 08/05/2014, 21:17
New from Turck, the sensor and automation specialist, are flow sensors with a sensor unit that can be freely aligned as required. The new plug-in mounting concept of the FCST series enables the sensor unit to be aligned in the flow channel as required – irrespective of how the process connection is mounted. This simplifies the aligned fitting that is required for reliable and precise flow monitoring. Screw-in adapters in standard industrial thread sizes enable the user to mount the flow sensors on different pipe diameters. In spite of the fast screw-in mounting facility, the sensor adapter system can nevertheless withstand process pressures of up to 100 bar. Another benefit of the FCST mounting concept is apparent with flow sensors with an integrated signal processor. Thanks to the flexibly...
939
Photoelectric Sensors for the Food Industry
- Banner Engineering Sensor Product NewsPublished on 08/05/2014, 21:12
Banner Engineering has released an IP69K photoelectric sensor for use in the food and pharmaceutical industry
Banner Engineering is offering the new QM26 and QMH26 photoelectric sensors, specially manufactured to comply with the requirements of the food and pharmaceutical industry. With their IP69K stainless steel housings, the devices are resistant to chemical cleaning agents and high cleaning pressures. Both variants are manufactured using only FDA compliant materials. Furthermore, the QMH26 comes in a hygienic design. It can therefore be used wherever the sensor can come into direct contact with food. Its smooth, self-drying surface does not have any gaps that would be difficult to clean or sanitize.
The sensors are permanently resistant to ambient temperatures from -30 to...
764
RET Automation Controls Celebrates 30 Years
- Company NewsPublished on 10/04/2014, 20:06
On the 11th of April 1984, RET received their first order for R186.00 from G. Boerstra (Pty) Ltd, and over the last 30 years has had the privilege of developing close relationships with customers throughout Southern Africa. With the support of some of the leading global automation providers, RET has become a leader in its field, offering high quality, innovative products and solutions. RET would like to thank all of it’s customers and suppliers for their support in making RET what it is today. RET would also like to thank all of it’s staff members for their efforts and the sacrifices they have made to build the RET business and brand. The last 30 years have been exceptional, but with new products and solutions being released every week, RET is sure that the next 30 will...
1165
ESCHA extends the 'Automation Line' range
- ESCHA Product NewsPublished on 07/04/2014, 21:00
The connector and housing specialist ESCHA now offers an additional special cable quality for its successful "Automation Line" product range. With the flexible, silicon- and halogen-free control line referred to as S7400, the M8x1 and M12x1 round connectors are particularly adapted for operations in robotic applications as well as handling- and assembly technology.
The new connectors referred to as ‘Automation Line robotic ‘are especially drag-chain adapted (up to 10 million cycles) and extremely torsion-resistant (up to 10 million cycles/+-360°). Additionally, they provide for good weld-field immunity, chemicals-, and oil resistance. The combination of these properties facilitates operations wherever high flexibility at concurrent reliability is essential in industrial...
948
R-Gage Series supports collision avoidance and vehicle detection in mining operations.
- RET APPLICATION NEWSPublished on 05/04/2014, 11:30
An updated series of radar-based sensors with enhanced capability for detecting large objects in challenging outdoor situations has been introduced by Banner Engineering. The R-Gage sensors support collision avoidance and vehicle management applications in container ports, traffic and parking systems, manufacturing, mining, materials handling and railroads. With expanded distance capabilities, the new sensors can detect objects both farther away from the sensor and closer to it (reducing “dead” zones). The Frequency Modulated Continuous Wave (FMCW) radar provides reliable detection in nearly any weather condition; it is not affected by rain, snow, wind, fog, light, humidity or temperature. It also detects stationary objects that cannot be detected by Doppler radar.The sensors provide dual-zone...
1066
New NIC series transfers data and up to 12 Watts of power without contact
- TURCK Sensor Technology Product NewsPublished on 05/04/2014, 11:19
At the Hannover Messe Turck is presenting for the first time its contactless inductive couplers for signal and power transmission. The inductive couplers of the NIC series consist of a primary and a secondary unit and can be connected as simply as a plug connection. They transmit 12 Watts of power across a 7 millimeter air interface. The diagnostic function detects the presence of the secondary unit as well as any metal objects in the air gap. With a tolerated angle offset up to 15 degrees and a parallel offset up to 5 millimeters, the couplers can also be fitted in restricted and non-standard mounting locations.
The standard version of the NIC series transfers two PNP switch signals. If the primary unit is connected to an IO-Link master, data can also be transferred bidirectionally from...
783
Banner Engineering Enhances DF-G1 Fiber Amplifier with IO-Link Communication
- Banner Engineering Sensor Product NewsPublished on 27/03/2014, 14:05
Banner Engineering has added IO-Link communication to its industry-recognised DF-G1 fiber amplifier. With IO-Link, Banner’s DF-G1 fiber amplifier can achieve point-to-point communication, allowing for complete configuration and monitoring capabilities.
The DF-G1 features an intuitive interface, dual display, digital readouts and easy set-up and configuration. An updated mechanical design with an improved fiber clamp allows for ease-of-use and stable sensing performance. Enhanced with IO-Link communications, the DF-G1 increases sensing capabilities for diverse applications, including plastic and glass assemblies, electronics assembly machines, pill and caplet counting and high-speed detection for registration mark or product-leading edge detection.
"The introduction of the IO-Link...
1141
Portable Data Logging Systems
- Simex Product NewsPublished on 19/03/2014, 11:57
RET are pleased to announce the release of new catalogue - "Portable Data Logging Systems". It includes detailed information about both the MultiCon and MultiLog series which have been built into portable, high quality, IP 67 cases.
Protection of electronic equipment and valuable recorded data is a growing concern. This is particularly important in non-stationary solutions, when measuring instruments are mounted in portable, sealed transport cases, which are the only barrier against harsh environmental conditions. Our systems are supplied in PELI cases which are a proven and reliable solution in the transport and storage of sensitive measurement instruments for professionals.
Click here for more infomation on the MultiCon Recorders | Controllers
Click...
1116
Hazardous Area Indicator Lights Provide Clear Status Indication for Global Applications
- Banner Engineering Lighting and Indicators Product NewsPublished on 12/03/2014, 08:09
RET Automation Controls has released the EZ-LIGHT® K30L and K50L Hazardous Area LED Indicator Lights. Featuring extensive ATEX and IECEX approvals, the indicator lights are safe to use in every classified zone or area in Africa—their IECEx approval means quicker authorisation for use in locations outside Europe and North America.
To accommodate diverse hazardous applications, the K30L and K50L are available in intrinsically safe (Ex ia), encapsulated (Ex mb/Ex ta) and non-sparking (Ex nA/Ex tc) models. The indicators also offer enhanced display flexibility, featuring five colors—green, red, yellow, blue or white—with up to three colors in one device. To eliminate false indication from ambient light, the indicator appears gray when turned off.
“Lighted operator guidance in hazardous areas is...
870
SC26-2 Safety Controller Provides Flexible Programming Capabilities
- Banner Engineering Machine Safety Product NewsPublished on 21/02/2014, 15:37
RET Automation Controls has released the SC26-2 Programmable Safety Controller for PLC-level capability and control without the programming complexity and steep learning curve of traditional PLCs. Designed to be more flexible and easier to use than other small footprint safety controllers, the SC26-2 uses safety function blocks, Boolean logic functions and a user-friendly programming environment for creating safety control logic.
With 26 input terminals and two redundant solid state safety outputs, safety system design engineers are able to easily monitor a variety of input devices, such as e-stop buttons, rope pulls, interlock switches, safety light curtains and other safety and non-safety input devices. The controller’s free PC Graphical User Interface configuration software features...
897
MultiCon Emulator for CMC-99 or CMC-141
- Simex Product NewsPublished on 17/02/2014, 11:46
Are you interested in the MultiCon controller/data recorder? Would like to test it before placing the order? You do not have to wait any longer to rent a demo unit. You can now download the MultiCon Emulator software and play with the unit yourself!
We are pleased to announce the release of the MultiCon Emulator software. This software allows you to run a virtual MultiCon on your computer screen and familiarise yourself with its functionality completely free of charge. The MultiCon Emulator is an accurate representation of the actual equipment. In order to test measurement inputs it has been equipped with the virtual measurement and relay output source. A full-featured recording module allows you to write data on the virtual drive and then send them on to a USB flash drive or DAQ Manager...
1088
High Performance Ultrasonic Sensors
- TURCK Sensor Technology Product NewsPublished on 13/02/2014, 09:06
Turck has released a new ultrasonic sensor series with short blind zones, large measuring ranges and a wide range of parameter options.
The new RU-U ultrasonic sensor series from Turck enables the user to cover large sensing ranges with fewer sensor variants. The Turck ultrasonic sensors in M18 and M30 housing styles thus effectively reduce the range of variants required for stock-keeping. This is made possible by the particularly short blind zones of the sensors, which offer large sensing ranges at the same time – for example with a 40 cm range the blind zone is only 2.5 cm.
In order to offer the right sensor for every application with only a few sensor variants, Turck has increased the versatility of the individual models: Thus the simple compact version of the RU40 and RU100 modules...
853
Banner provides a solution for rotary bottle fillers
- RET APPLICATION NEWSPublished on 13/02/2014, 08:43
Image Sensor Inspects & Verifies Vent Tube Presence on High Speed Rotary Fillers.
Banner Engineering, the sensor specialist, was recently approached by a large-scale brewing company that brews and bottles many popular brands of beer in the United States to supply a solution for a unique problem they had on high speed rotary bottle fillers.The rotary fillers dispense beer into bottles travelling at speeds of up to 900 bottles per minute. Periodically a spreader washer and/or a vent tube may become loose and drop into a bottle or onto the line. Beer will continue to dispense but the bottles will not fill correctly and product will be wasted. If undetected, affected bottles may be capped, packaged and even shipped, resulting in the product having to be recalled. The company needed a...
1235
Communication-Enabled Temperature Sensors
- TURCK Sensor Technology Product NewsPublished on 02/02/2014, 12:42
RET has released Turck's new range of TTM temperature transmitters with models in a compact plastic or 1.4404 stainless steel housings, the output can be individually set by the customer. In addition to an analog output (4…20 mA) in a 2-wire circuit, the new sensors offer a switching output and the possibility to communicate via IO-Link. Users requiring temperature sensors with different parameters can reduce the number of devices that need to be kept in stock.
This is also made simpler thanks to the modular concept: The range includes versions of the temperature sensor with a fixed probe, a variant is also available which can be fitted with a probe in the required mounting form via the M12 interface. Like other sensors of the TTM series, the new devices with their integrated electronics are...
762
Fieldbus Junction Boxes with Integrated Diagnostics
- TURCK Fieldbus Technology Product NewsPublished on 09/01/2014, 20:45
Junction boxes for Foundation Fieldbus and Profibus-PA can be used worldwide in all Ex zones
Turck has launched a new generation of IP20 junction boxes for Foundation Fieldbus and Profibus PA networks. The fieldbus junction boxes of the JRBS series can be used in the safe area and in the Ex area in zones 1, 2, 21 and 22. The short-circuit current limitation on the spur lines also provides greater safety. This prevents the failure of the entire segment and provides protection from possible plant downtimes. The integrated LEDs are used for local diagnostics at the device. They offer the user fast and reliable indication of short-circuits, voltage drop or communication failure.
The universal shielding concept of the fieldbus junction box supports all industry-proven shielding methods. The...
899
Hans Turck is 90
- Company NewsPublished on 09/01/2014, 09:00
On January 9, Hans Turck, co-founder of the automation specialist Turck, celebrated his 90th birthday. The birthday celebrant, who has lived in Mülheim an der Ruhr and Cape Town since his retirement from the company in 1998, started the special day together with his wife in South Africa, his adopted country.
His outgoing personality and openness, his outstanding sales skills and his ability to enthuse his customers, soon paved the way for Hans Turck to become a successful entrepreneur. After completing his engineering degree in 1950, he first of all gained ten years experience in sales before setting up his own engineering office in Mülheim, from which Hans Turck GmbH & Co. KG later developed. In 1965 Hans Turck sold his first product – an amplifier module that his brother Werner had...
879
Flush mount illuminated E-Stop
- Banner Engineering Machine Safety Product NewsPublished on 25/12/2013, 21:30
Banner Engineering adds surface flush mount models to its line of Emergency Stop (E-Stop) Buttons. The new 40-mm emergency stop buttons are designed to easily mount to a wall or other flat surface without disassembling or individual wiring. Available with a non-illuminated base with four actuator styles: standard, illuminated actuator, lockable actuator and an illuminated lockable actuator; or an illuminated base with a standard or a lockable actuator.
To meet diverse application requirements, the illuminated-base Surface Flush Mount E-Stops feature Banner's industry-recognized EZ-LIGHT® logic and are available with two colors (yellow or green and red lighting) or one color (red lighting). Depending on the model, the highly visible LED illuminated-base changes from yellow to flashing...
1097
Compact UHF RFID Read/Write Head
- TURCK Identification Systems Product NewsPublished on 15/12/2013, 18:44
Turck's Q120 read/write head is designed for UHF applications with restricted mounting space
Turck has added the compact TN865-Q120 UHF read/write head to its BL ident RFID system. In its space saving IP67 aluminum housing, the Q120 combines a circular polarized antenna and the entire electronics in one. The Q120 is smaller than a 1 liter milk carton and is particularly suitable for applications with restricted mounting space – such as in automated materials handling systems.
The Q120 can be used for the close and medium UHF range. The read/write head thus completes the BL ident RFID system in the UHF frequency band. This makes BL ident even more attractive for UHF applications in which different ranges are required – not least due to the excellent price performance ratio of the Q120. Like...
1053
MultiCon now with MultiLevel Access
- Simex Product NewsPublished on 10/12/2013, 21:44
In order to meet the requirements of the most difficult industrial automation applications, we have equipped the multichannel MultiCon CMC controllers with a new feature. The “MultiLevel Access" mode makes the MultiCon CMC even more universal. You can define up to 16 independent users including the administrator who is the only user with a permission to freely configure the device without any limitations. The administrator’s role also consists in defining permissions for other users. Only one user can be logged on at a given moment. The user is logged off after the lapse of time from the moment of the last interaction of the user with the device as specified by the administrator or upon express request of the user after clicking the padlock icon on the information bar. The authorisation...
988
Automation Award goes to QR24 Encoder
- TURCK Sensor Technology Product NewsPublished on 10/12/2013, 21:30
The visitors to SPS IPC Drives have chosen: TURCK's contactless inductive encoder QR24 wins the Automation Award
Voted by the visitors of the SPS IPC Drives, TURCK's contactless inductive encoder RI360P-QR24 has won the Automation Award 2013 for the most innovative new development in the field of automation technology. The prize is awarded annually by the magazine elektro Automation. A jury of experts from the congress-committee SPS IPC Drives, VDMA, ZVEI and the editorial office of elektro Automation has first nominated a top-10 list. From these ten proposals the visitors could select their favourite. We would like to thank all the participants, who voted for our new encoder series.
New QR24 Encoder versions just released
The contactless inductive encoder series RI360P-QR24 has...
2107
New R-GAGE™ Radar Sensors for Reliable Detection in Diverse Outdoor Applications
- Banner Engineering Sensor Product NewsPublished on 03/12/2013, 11:18
Banner Engineering has expanded its line of R-GAGE™ QT50R radar sensors with four new models to reliably detect moving or stationary objects. Designed to meet flexible application requirements and weather conditions, the enhanced line of radar sensors are ideal for collision avoidance on mobile equipment, outdoor crane-to-crane proximity detection, high-volume parking and vehicle detection and flatbed or box truck detection at loading docks.
Operating with Frequency Modulated Continuous Wave (FMCW) radar, R-GAGE QT50R sensors provide accurate object detection of stationary and moving targets by providing distance and speed measurement. The sensors function in Industrial, Scientific and Medical (ISM) telecommunication band, with no special license required. For enhanced protection, R-GAGE...
1120
Encapsulated LED Area Lights
- Banner Engineering Lighting and Indicators Product NewsPublished on 03/12/2013, 10:54
Banner Engineering announces its WLA Series Encapsulated Area Lights. Designed for use in industrial environments, these powerful, solid-state LED lights are completely encapsulated in optically clear polyurethane—enhancing chemical compatibility and increasing their resistance to shock and vibrations.
The Encapsulated WLA light is a rugged, high intensity light ideal for machine lighting, visual inspection stations and general industrial area lighting. The sealed light is available in four sizes and has a sleek polycarbonate housing and slim profile.
“The Encapsulated WLA LED Area Lights provide our customers with a high-brightness, vibration-resistant lighting solution for some of the toughest industrial applications, such as stamping machines and punch presses,” said Kathy Erickson,...
1505
Heavy-Duty LED Lights Provide Superior Resistance Against Oil, Chemical and Water in Harsh Environments
- Banner Engineering Lighting and Indicators Product NewsPublished on 30/11/2013, 16:48
Banner Engineering introduces new WLC90 and WLC60 Heavy-Duty LED Lights. Designed to withstand high-pressure washdown and exposure to oils and coolants, Banner’s heavy-duty LED lights are ideal for diverse harsh environments, including food and beverage processing, machining centers and general industrial automation.
To accommodate diverse applications, the WLC90 offers several lens options, in addition to three discrete levels of intensity which are easily selected via wiring connections. An optional pan and tilt stainless steel mounting bracket adds versatility to the design, allowing the light to be directed in any direction.
Featuring a conservative mechanical design and state-of-the-art LED technology, the WLC60 protects against liquid ingress, while delivering best-in-class...
1142
Self-Contained, Compact Photoelectric Sensors Provide Reliable Detection for High-Volume Installations
- Banner Engineering Sensor Product NewsPublished on 30/11/2013, 16:30
Banner Engineering introduces its next-generation S18-2 compact photoelectric sensor series. These self-contained, DC-operated sensors provide an economical sensing solution for cost-sensitive and high-volume installations. Built with Advanced ASIC (Application Specific Integrated Circuit) technology, the diffuse mode S18-2 sensors are resistant to fluorescent light and offer a high level of crosstalk avoidance.
Banner S18-2 sensors feature a powerful and bright visible red emitter beam that reaches up to 25 meters, which allows for easy alignment and set-up. For ease of use, the S18-2 sensors also offer a highly visible output, and dual-function power and stability indicators. The indicators are comprised of one green and two yellow LED lights. Solid green indicates power is applied...
580
EZ-LIGHT® K30 Touch Provides Compact, Single-Point Operation for Machine Activation and Pick-to-Light Applications
- Banner Engineering Lighting and Indicators Product NewsPublished on 30/11/2013, 16:24
Banner Engineering introduces the EZ-LIGHT® K30 Touch, a smaller version of the company’s industry-recognized K50 Touch. Featuring a compact, rugged design, this single-point device is designed for efficient machine activation and pick-to-light operations.
The K30 Touch button provides simple, precise performance, easily changing from green to red with the touch of a finger, hand or whole palm—with bare hands or work gloves—for bright, clear indication. Featuring an ergonomic design, the K30 Touch requires no physical pressure to operate, preventing stress on hands and wrists from constantly pressing buttons to actuate machines or verify correct picks.
“We received positive feedback with the K50 Touch, as it efficiently streamlines machine activation and pick-to-light operations,” said...
662
Reliable, cost effective alternative to manual UV detection system
- RET APPLICATION NEWSPublished on 30/11/2013, 16:18
In large, high production sawmills where success can be measured in board meters, the price per board is determined by the grade of each individual board. It is essential that every board be properly graded, sorted and processed. Operators grade each board as it travels along the conveyor line, marking it with a UV detectable crayon wherever there is a flaw or imperfection in the wood. A sensor or manual inspection is then used to detect the UV marks and direct the board to an area where it can be repaired or rejected. Equipment used in sawmills faces unique environmental challenges from tree pulp, dirt and other debris. Traditional UV sensors frequently fail under these conditions. They also have a limited operating distance and therefore need to be mounted close to the sensing point,...
2008
Banner’s WLA Work Lights solve inspection application for global healthcare company
- RET APPLICATION NEWSPublished on 29/11/2013, 13:22
For companies that produce liquid pharmaceutical products, such as those used in syringes and IV bags, it is critical to identify particulates or foreign substances of any size before the products are released for distribution.A global provider of healthcare products had been using vision machines to detect particulates in their pharmaceuticals. When the machines were no longer able to detect contaminants to the required percentage level, the company began using human visual inspections. Since many of the particulates are extremely minute, the company needed to install bright and highly uniform illumination in their work stations so operators could effectively verify the quality of the products.Banner Engineering introduced the customer to the WLA Work Light Series, a perfect fit for their...
818
Blue QS18 detects amber prescription bottles
- RET APPLICATION NEWSPublished on 29/11/2013, 13:12
Pharmaceutical companies and pharmacies are making a switch from polypropene (PP) to polyethylene terephthalate (PETE) bottles for prescription fulfilment. The amber coloured PETE bottles are cost effective and easy to recycle, however the plastic’s clear (almost semi-transparent) appearance poses a challenge to standard red LED sensors that are used in pharmaceutical plants.Sensors with red LED’s that have been used in the past essentially see through the PETE bottles, causing problems such as missed detection, double counting and mislabelling. With hundreds of red LED sensors needing to be replaced, Banner Engineering was approached to come up with a solution.After many hours of testing it was found that the best solution was to replace the red LED with a blue LED light source....
1087
Pick-To-Light Retroreflective Array
- Banner Engineering Lighting and Indicators Product NewsPublished on 02/10/2013, 08:36
Banner Engineering introduces the PVL Parts Verification Array (PVL) for lean manufacturing. Designed with retroreflective technology, the PVL light array provides quality visibility, quick response time and wide, reliable coverage to help streamline pick-to-light and conveying processes for factory and warehouse applications.
“The fast two millisecond response time and wide coverage area make the PVL an ideal solution for applications beyond pick-to-light,” says Chuck Dolezalek, Director of Product Development for Lighting and Indicators. “Detecting medium to large sized objects moving at high rates of speed—like boxes on a conveyor—are cost-effective uses for the PVL.”
The PVL light array features opto-mechanical alignment with bright red emitter beams spaced 70 mm apart for easy...
825
Multihop radio with built-in I/O connects directly to sensors and probes
- RET APPLICATION NEWSPublished on 30/09/2013, 19:52
A new radio from Banner Engineering combines wireless transceiver, power supply and I/O circuits in a single compact housing. The DX80DR multiHop radio connects sensors directly to the network, eliminating the need for data-loggers, power supplies, PLCs or HMIs at the sensor location.
The enhanced radios expand the capability of Banner’s SureCross wireless solutions in numerous industries including oil & gas, composting, grain handling, water monitoring, aquaculture, irrigation, parking, flood warning and facilities monitoring.
The increased capability of the radio allows real-time access to information that was previously logged at sensor sites for later download. I/O terminals are provided for thermocouples, digital and analogue input and output, battery-operated irrigation valve...
795
Shrink Sleeve Labelling at Very High Speed
- RET APPLICATION NEWSPublished on 25/09/2013, 09:21
Banner Sensors Keep Pace at 800ppm. To meet production demands, large scale bottlers rely on automated equipment operating at high speeds over prolonged periods of intense use. Equipment accuracy and consistency are essential to maintain standards. Products that are not correctly filled, capped or labelled may have to be removed from the line and reprocessed, driving down efficiency and productivity and raising expenses. A challenging application came from a leading manufacturer of labelling equipment who offers high-speed shrink sleeve label applicators designed to process 800 bottles per minute. The company had used standard retroreflective sensors to detect bottles on the line and trigger a label sleeve to drop down. These sensors did not perform reliably at high speeds....
1078
High Speed Double End Sensors
- Jungmichel Product NewsPublished on 12/09/2013, 11:51
New! Very fast, high speed double end sensors with 2 msec. response time from Jungmichel. These sensors have 2 outputs for no / 1 end and one / double end discrimination. All in one sensors with M12 connector, Dual Led and teach-in programmable. No amplifier necessary.
2604
Active Passive Junction Boxes
- TURCK Connection Technology Product NewsPublished on 12/09/2013, 11:41
Turck has released a new series of passive junction boxes – including an active IO-Link variant for simplifying the connection of binary signals to the control cabinet.
Turck has extended its range of passive junction boxes. As well as standard junction boxes with 4, 6 and 8 input connectors and a multi-pole cable output, the customer will also be able to find two active IO-Link variants. The IO-Link junction boxes combine 16 switching status elements in a 16-bit IO-Link signal, thus bringing 16 switching signals from the machine to the control cabinet via a single standard cable.
Instead of assigning each signal to the individual wire of an M23 master cable, terminating and routing them into the control cabinet with expensive multipole cables, the IO-Link junction box only requires a...
828
Interface modules with display and DTMs
- TURCK Interface Technology Product NewsPublished on 12/09/2013, 11:28
Turck enables asset management in the physical layer with new FDT based interface modules. Turck has added new FDT/DTM based interface modules with display to the interface product portfolio. After last year’s introduction of the temperature transducer IM34 the display series is now completed with the models IM21 and IM21 Ex (rotational speed monitor), IM33EX (isolating transducer) and IM43 (limit value monitors). Appart from a two-line transflective LCD, all modules feature a ring buffer for convenient process diagnostics. A universal power supply unit and the possibility for HART communication round off the capability profile and the universal applicability of these devices. The product specific DTMs enable an efficient asset management, also for interface products.
The ring buffers...
1606
FORD Motor Company visit RET
- Company NewsPublished on 12/09/2013, 11:09
On the 12th of September 2013 RET Controls held an open day for FORD Motor Company.
The guests from FORD were broken up into small groups and taken through RET's demonstration room. Here they were given the opportunity to see RET's full product line in action.If you or your company would like to attend one of RET's open days please do not hesitate to contact us.
1025
RFID Safety switches improve safety levels
- Comitronic-BTI Product NewsPublished on 19/06/2013, 11:00
The latest generation of safety switches from Comitronic-BTI use RFID technology to improve safety levels and operation modes. Used to control the position of movable guard doors on machines, they are available in stand-alone mode (AMXRS) or non stand-alone modes (XORFS) in connection with the AWAX safety module.
The new safety switches use an industrial RFID 125 kHz technology, offering a totally non-cheatable and reliable solution. The RFID system allows up to 16 million different codes. Comitronic has developed an automatic self learning system to mate the transmitter to the receiver. Each transmitter will only work with its own receiver once both parts have been uniquely coded.
Because these RFID safety switches do not contain any magnets, they are also suitable for use in applications...
1236
iVu Machine-Mountable Remote Display
- Banner Engineering Vision Sensors and Vision Lighting Product NewsPublished on 17/06/2013, 19:46
Banner Engineering adds the Machine-Mountable Remote Display to its industry-recognized line of iVu Vision products. The Machine-Mountable Remote Display enables users to view the iVu sensor image remotely and serves as a constant monitoring and user programming interface, without interference from electrical noise.
The Machine-Mountable Remote Display features industrious metal housing to shield the display from electrical noise, while its cabled connector provides a secure, dependable connection—further enhancing the device's electrical noise immunity.
“Our goal was to create a remote display for applications that require a permanent connection to the sensor within electrically noisy environments, and one that worked with all Banner iVu sensors,” says Dean Tyo, Chief Engineer of...
1154
Industrial Ethernet Connectors from ESCHA
- ESCHA Product NewsPublished on 11/06/2013, 10:37
Comprehensive product portfolio for a fast and safe data transmission up to 10 Gbit/s. ESCHA has extended its connectivity line for Industrial-Ethernet-Applications by several products that guarantee a fast and safe data transmission up to 10 Gbit/s. The new M12x1 round connectors with X-Coding as well as the new RJ45-Connectors are respectively available as field wireable- or overmolded variants. Moreover, the connectivity specialist is also introducing a device connection and a PCB flange with X-Coding.
Recently, there has been increasing demand for a consistent and reliable data transmission between the harsh industrial area and the office communication. Within the scope of its product range for Industrial-Ethernet-Applications, ESCHA is providing, as of now, new connectivity...
1038
Emergency Stop Button with Illuminated Base
- Banner Engineering Machine Safety Product NewsPublished on 10/06/2013, 10:33
New E-Stop buttons from Banner Engineering combine two functions in one housing. Banner Engineering introduces new illuminated E-Stop buttons. The new U.S. patent-pending 30 mm mount Emergency Stop pushbutton combines safety operation and high visibility status indication in one housing for the first time. Models are also available for flush mounting. With no assembly, individual wiring or additional enclosure required, the E-Stop enhances productivity as well as safety. The button base is illuminated in yellow when the button is armed and the machine is running or enabled to run. When the button is pushed, the steady yellow turns to flashing red, allowing quick identification of the actuated button to reduce downtime.
Multiple buttons can be connected with CSS Series Hookup Cordsets,...
748
SUPERMAGNET – Coded Safety Switch with electromagnetic locking
- Comitronic-BTI Product NewsPublished on 06/05/2013, 10:20
Safety Switches with electromagnet lock. Comitronic-BTI the French manufacturer of machine safety products has announced the “SUPERMAGNET” locking system, to prevent the accidental opening of machine guards while dangerous machinery is still in motion.
The SUPERMAGNET range exists in two versions, one is locking when energised and the other is unlocked when energised. Both versions use robust electromagnets mounted in stainless steel, resistant to shock and impact, and are suitable for harsh environments where regular wash down procedures use aggressive detergents (food, pharmaceutical and chemical industries). Also incorporated into the SUPERMAGNET is a coded non-contact safety switch. This uses the ACTOM®2 process to ensure that it is not possible to override or defeat the...
1080
SureCross® Gateway for Wireless Sensors
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 29/04/2013, 10:14
Banner Engineering introduces the SureCross® B2Q Wireless Gateway Module. Developed to provide embeddable, board mount industrial wireless providing cost-effective communication capabilities for the company's Q45 wireless sensor network. The module features discrete outputs and DIP switches to map inputs from up to two wireless sensors to the Gateway's outputs. With its board-level design and easy mounting capabilities, the Banner Q45 B2Q Gateway is easily embedded inside equipment, enclosures and on control panels.
"The SureCross B2Q Gateway module features a cost-efficient design with a single board and wireless modular controller, "said Bob Gardner, Senior Product Manager at Banner Engineering."With a smaller footprint than other gateways, the module can be easily mounted in...
652
Non-Contact Inductive Encoders in IP69K
- TURCK Sensor Technology Product NewsPublished on 24/04/2013, 08:34
Turck is presenting the first non-contact and absolutely wear-free universal encoder. With the RI360P-QR24, Turck is the first manufacturer to offer on the market a non-contact inductive universal encoder with high resolution, absolutely wear-free operation, which is at the same time immune to magnetic fields. The sensor and the positioning element of the encoder are fully encapsulated and therefore designed as two independent and fully sealed units that work together without contact. Any vibration or shock from the shaft is therefore not passed on to the sensor. This makes the RI360PQR24 a superior sensor compared to both optical and magnetic encoders. Thanks to its high degree of protection to IP69K and over 18-bit resolution, machine downtimes and maintenance times resulting...
766
BL20 Gateway for Serial Modbus Communication
- TURCK Fieldbus Technology Product NewsPublished on 24/04/2013, 08:25
Turck is combining several serial Modbus standards in one compact gateway. Turck has expanded its BL20 I/O system with a new gateway for serial Modbus communication. The gateway supports both the Modbus RTU as well as the ASCII protocol. The user can also choose between either RS485 or RS232 for the physical interface. Push-in terminals for connecting the fieldbus and power supply cables quickly and directly eliminate the need for any time consuming preparation of the typical 9-pin SUB-D connectors. The most important parameters, such as baud rate, address assignment, bus termination and RS232/RS485 can be set easily on the gateway using the DIP switches. Other functions such as ASCII mode and other baud rates can be configured using FDT/DTM with Pactware. A Mini-USB port can be...
602
Factor 1 Inductive Sensor in a IP69K Housing
- TURCK Sensor Technology Product NewsPublished on 23/04/2013, 08:44
Turck is offering a robust Q80 uprox+ proximity switch with a 75 mm switching distance. Turck is extending its successful uprox+ sensor range with a robust washdown variant in a Q80 housing. The non-flush inductive proximity switch detects all metals with the same high switching distance of 75mm. The sensor can even be mounted partially embedded or fully flush – its switching sensitivity adjusts itself to the mounting conditions accordingly. With this degree of flexibility the Q80WD is suitable for use in a wide range of applications, enabling users to effectively reduce the range of variants required. Turck is offering the sensor with a four-pin M12 connector and an antivalent PNP switch output. The application fields of the Q80WD are varied, ranging from gap detection in...
608
Banner U-GAGE T30UX Ultrasonic Sensors
- Banner Engineering Sensor Product NewsPublished on 15/04/2013, 21:44
Banner U-GAGE T30UX Ultrasonic Sensors Feature Extended Range, Temperature Compensation for Demanding Applications
Banner Engineering Corp. introduces the U-GAGE T30UX ultrasonic sensor for challenging applications. With its extended functional range and advanced temperature compensation, the T30UX sensor withstands hostile environments, providing superior ultrasonic sensing to solve even the toughest application challenges. The T30UX sensor features a robust U-GAGE housing to resist harsh environmental conditions and provides a variety of model options to meet a broad range of application requirements.
The T30UX ultrasonic sensor is available in a choice of three ranges for reliable sensing from 100 mm to 3 m and delivers high-accuracy performance with built-in temperature compensation...
1274
Namur Sensor with Terminal Chamber Connection
- TURCK Sensor Technology Product NewsPublished on 01/04/2013, 08:06
Turck releases SIL2 and Atex-approved Namur sensors with a flexible terminal chamber connection.
TURCK the German sensor specialist has released Namur sensors with SIL3 certification and ATEX approval for use in the Ex area. The inductive proximity sensors with a terminal chamber offer a vibration-proof connection using removable screw or cage clamp terminals, thus considerably simplifying exchange during servicing. The wash-down version WDTC Namur sensors also offer maximum freedom and switching distances. The user can select between straight or 90 degree angled cable outlet by simply rotating the cover. The cable is fed into the terminal chamber cover via a standard M16 cable gland.
LEDs in the terminal chamber indicate the switching state of the...
808
IP67 Power Supply Units for Direct Mounting in the Field
- TURCK Fieldbus Technology Product NewsPublished on 28/03/2013, 09:43
Turck's robust 24 V switched mode power supply units for field mounting reduce cabling. Turck is offering customers that require a 24 volt power supply directly in the field a series of switched mode power supply units with IP67 protection. A large amount of expensive cabling with large cross sections is required if the field device and the control cabinet for the plant are large distances apart. The use of power supply units with IP67 protection is particularly suitable here, since they provide a 24V power supply directly in the field without any voltage drop. Due to their degree of protection to IP67, the new PSU67 power supply units can also be fitted directly to the machine without any protective measures. The power supply units offer a high level of failsafe performance,...
915
VSM Series high-performance, yet cost-effective sensors
- Banner Engineering Sensor Product NewsPublished on 15/01/2013, 16:39
Tiny, yet tough; high-performance, yet cost-effective — all of which fittingly describe the new VSM Series Micro Sensors from Banner Engineering Corp. The VSM Series sensors provide an ideal solution for a wide variety of applications in a number of different industries, specifically those requiring smooth, hygienic designs such as food and beverage, and pharmaceuticals. Other applications include die sensing, part presence verification, and assembly machines with articulated or reciprocating motion.
"The VSM Series sensors are an important addition to our line of miniature photoelectric sensors, not only because of their size, but also because of their ability to function in heavy washdown environments that use a variety of liquids and chemicals," said Mike Dean, Product Planning...
555
CHEMICALLY RESISTANT U-GAGE® ULTRASONIC SENSORS
- Banner Engineering Sensor Product NewsPublished on 14/01/2013, 22:50
Banner Engineering announces the addition of chemically resistant models to their U-GAGE® line of ultrasonic sensors. The chemical protection comes from a factory-installed Teflon® flange and film coating bonded over the sensors transducer, sealing against gases and vapours that would destroy standard models. Chemically resistant U-GAGE ultrasonic sensors are available in all QT50U and most T30U models and are ideal for a wide variety of level control applications in cleaning, etching and other chemical processes where material is corrosive or caustic.
QT50U models have a sensing range of 200 mm to 8 m, and T30U models have a sensing range of 300 mm to 1.5 m. With the exception of range, performance specifications for both sensors are identical to those of the...
1063
First Wireless Sensor Familiy
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 07/01/2013, 21:40
Banner introduces wireless photoelectric sensors which can be easily integrated in radio networks
The first self-contained wireless photoelectric sensing solution for multiple monitoring and control applications has been introduced by Banner Engineering. The new Wireless Q45 includes a sensor, radio and internal battery power supply in a single compact and robust housing. A variety of sensing modes are available in the new series, allowing for functions including presence/absence, alignment, position, counting, monitoring and detection. Battery life is up to five years depending on sensor model and application, and the housing is IP67 rated.
Signals from the sensors are received at a wireless network gateway that interfaces with all common PLCs and other industrial control systems. Basic...
649
T-GAGE® M18T INFRARED TEMPERATURE SENSOR WITH ANALOGUE OUTPUT
- Banner Engineering Sensor Product NewsPublished on 27/12/2012, 22:39
Banner Engineering announces the addition of the M18T analogue output model to its line of T-GAGE® infrared temperature gauging sensors. The M18T senses whether the object is warmer or colder than its surrounding-even when the difference is only 3°C and even if the object is stationary. The self-contained sensor requires no controller to operate, and its TEACH function allows the user to program two distinct temperature switchpoints for an output that automatically scales over a positive or negative slope.
The M18T features an 18 mm stainless-steel barrel construction with fully encapsulated electronics rated IP67 for reliable operation-even in harsh sensing environments. It is ideal for a variety of applications such as monitoring surface temperature; forewarning of overheating...
838
iVu Remote Touch Screen Display
- Banner Engineering Vision Sensors and Vision Lighting Product NewsPublished on 27/12/2012, 20:46
Banner Engineering introduces the iVu Remote Touch Screen Display, the latest addition to Banner's innovative iVu Image Sensor series, delivering easy-to-apply yet comprehensive vision inspection to hard-to-access areas. Both the iVu TG Image Sensor and iVu Bar Code Reader—first introduced with integrated touch screens for onsite inspection setup and modifications—are available as iVu Remote Series Sensors, replacing the sensors' touch screens with a separate display. This arrangement allows users to program iVu sensors through a single display and change inspection parameters remotely. With the iVu Remote Display, users can realize the benefits of an all-in-one vision inspection solution—with no PC or external devices required—in areas difficult to reach or restricted to personnel access,...
671
QS18 Adjustable-Field Foreground Suppression Sensors
- Banner Engineering Sensor Product NewsPublished on 26/12/2012, 19:29
Banner Engineering introduces the WORLD-BEAM® QS18 Adjustable-Field Foreground Suppression Sensors, designed to reliably detect objects regardless of colour, reflectivity, surface irregularities or background conditions. The sensor's universal mounting design makes installation quick and easy, while a simple screwdriver adjustment allows for precise setup of sensing range. With a compact and IP67-rated sealed housing, the QS18 adjustable-field sensors deliver an exceptional sensing solution for small or difficult-to-reach areas.
The QS18 Adjustable-Field Foreground Suppression Sensors operate in diffuse mode, detecting light returned by the background, but ignoring light returned by the object. The concept is similar to that of a polarized retroreflective sensor; if the sensor cannot see...
905
WORLD-BEAM® Q20FF fixed-field background suppression sensor
- Banner Engineering Sensor Product NewsPublished on 25/12/2012, 22:26
Banner Engineering Corp. introduces the WORLD-BEAM® Q20FF fixed-field background suppression sensor to its line of compact photoelectric sensors. The Q20FF offers the same high performance standards as other Banner sensors, but has been enhanced with visible red, fixed field background suppression and a sensing range up to 150 mm. With the enhancements, Banner has increased the number of applications the Q20 can solve in a variety of industries, such as material handling, robot assembly, food and beverage, and pharmaceutical goods.
"With the addition of the visible red fixed field background suppression models, Banner has expanded the number of applications the Q20 series can solve," said Dennis Smith, Technical Marketing Manager at Banner Engineering. "The high performance optical design...
961
LED work lights for industrial use
- Banner Engineering Lighting and Indicators Product NewsPublished on 25/12/2012, 21:58
Robust LED work lights from Banner Engineering ensure a reliable, energy-saving illumination of workplaces and control cabinets
Banner Engineering announces energy-saving LED work lights of protection categories IP67/IP69K. The robust design and a life-span of 100.000 hours allow the use in a wide field of application, where a reliable, bright and even illumination is needed under rough environmental conditions. The color temperature lies in daylight range between 5,000 and 10,000 Kelvin. The work lights can be connected either via a standardized M12x1-plug connection or directly via open wire ends. The power-on/-off is carried out either over the connection with the supply voltage (10...30 VDC) or – when there is a constant power supply – over the integrated switch on the LED work light,...
582
DataMatrix/Barcode reader with touch-screen setup
- Banner Engineering Vision Sensors and Vision Lighting Product NewsPublished on 25/12/2012, 20:30
Banner’s new iVu BCR reads multiple codes in the same image and is set up without a PC
A versatile bar code reader that is easily configured from the touch-screen has been introduced by Banner Engineering. The new iVu BCR reads DataMatrix and all standard linear bar codes, and includes the ability to read multiple codes of different types in the same image. In addition to DataMatrix, the iVu BCR reads the following linear codes: Code 128, Code39, CODABAR, Interleaved 2 of 5, EAN13, EAN8, UPCE, Postnet, IMB and Pharmacode. An intuitive multi-language user interface allows for easy configuration without the need for a PC. The menu-driven interface and 68.5 mm colour LCD touch-screen controls (320 x 240 pixels) allow easy setup and changes to inspection parameters. A software emulator lets...
504
Analogue sensor for detection of metal types
- TURCK Sensor Technology Product NewsPublished on 25/12/2012, 20:15
Amplitude and phase signal evaluation enables recognition of different metals independently of the distanceTurck the sensor, fieldbus and interface specialist has developed a unique special sensor in close co-operation with customers which can detect different metals independently of the distance. The special feature of the metal detection sensor is an analogue eddy current sensor which detects the amplitude signal as well as the phase signal. Both signals (0-10 V) are emitted as an analogue value and can be connected using a control unit and analysed mathematically. The permissible temperature range of the sensor is between -10 and +70 °C. The biggest advantage of this inductive analogue measurement method is the fast detection of the metals, independently of the distance involved, which is...
732
Factor 1 sensors in 2-wire DC version
- TURCK Sensor Technology Product NewsPublished on 25/12/2012, 20:08
Turck is the first supplier to present 2-wire DC sensors without reduction factor. Turck has extended the uprox+ sensor family with a Factor 1 sensor version in 2-wire DC technology. The inductive 2-wire technology is of special interest for machine builders, who sell to Japan, France and the USA, as this type of sensor is mostly applied in these countries. Moreover, mechanical switches can easily be replaced as the new sensor version can be connected to the existing cable network. The first series of the 2-wire DC sensors by Turck is available as M12, M18, M30 and CK40 version. If the sensors are combined with the Turck Remote-I/O Fieldbus system BL20, events of wire break or short circuit can be detected immediately. The Factor 1 sensors of the uprox+ family made by Turck do...
558
Factor 1 sensors with terminal chamber
- TURCK Sensor Technology Product NewsPublished on 25/12/2012, 20:00
High flexibility with respect to mounting is a promising feature of the new uprox+ sensors with integrated terminal chamber. As this version is preferably applied in the Food & Beverage industry, the uprox+ Wash-Down series will be first product line with the new terminal chamber. Similar to the cable versions M12, M18 and M30 (flush and non-flush mounting), the new version with integrated terminal chamber fulfils the requirements to use food-safe materials which are resistant to cleaning agents, high pressure and steam jet cleaning methods.
The compact and FDA conform terminal chamber sensors enable a straight or 90° angled cable routing by simply twisting the cover. The cable is linked via a standard M16 cable gland to the cover of the terminal chamber. Removable screw or cage clamp...
689
SLM Photoelectric Slot Sensor
- Banner Engineering Sensor Product NewsPublished on 24/12/2012, 23:05
RUGGED METAL FIXED-DESTANCE SLOT SENSORS DELIVER ULTRA-FAST RESPONSE TIME.
Banner Engineering Corp. announces its SLM Series Metal Slot Sensors that sense objects that pass between its fixed-distance opposed-mode emitter and receiver. Available in six slot widths, all models have a rugged metal housing and a fast response time of 500 microseconds, making them ideal for high-speed counting, edge detecting, position verifying and level monitoring applications. The fixed slot width provides reliable opposed-mode sensing of objects as small as 0.30 mm. The available slot widths of 10, 30, 50, 80, 120 and 220 mm range.
“The U-shaped metal housing of the SLM sensor makes it versatile, durable and easy to use,” explained Jeff Curtis, senior application...
978
M25 Full Metal Ultrasonic Sensor
- Banner Engineering Sensor Product NewsPublished on 17/12/2012, 22:13
Banner Engineering presents the first fully metal stainless steel ultrasonic barrier sensor for aseptic applications
Banner presents the first fully metal ultrasonic barrier sensor worldwide. The fully encapsulated M25U is completely enclosed in stainless steel – including both the housing and sonic converter face – and complies with degrees of protection IP68/IP69K. Thus the ultrasonic barrier sensor consisting of both transmitter and receiver is particularly suitable for detection of bottles and containers in aseptic applications, such as bottling operations in H2O2 atmospheres.
The M25U fully fulfills all demands relating to hygienic design in the beverage, food and pharmaceutical industries. The stainless steel enclosure is not just resistant to chemicals and aggressive cleaning...
1119
ADJUSTABLE FIELD SENSORS
- Banner Engineering Sensor Product NewsPublished on 26/11/2012, 19:08
ADJUSTABLE FIELD SENSORS WITH BACKGROUND OR FOREGROUND SUPPRESSION FOR RELIABLE OBJECT DETECTIONNew WORLD-BEAM® QS18 from Banner Engineering allows background suppression sensing up to 300 mm; foreground suppression up to 200 mm Two new adjustable field photoelectric sensors from Banner Engineering provide reliable object detection in a wide range of manufacturing, packaging and material handling applications. The WORLD-BEAM® QS18 Background Suppression sensor ignores everything beyond an adjustable set distance up to 300 mm, allowing operation in situations where the background cannot be controlled. Its companion product, the WORLD-BEAM® QS18 Foreground Suppression sensor, detects objects of any shape or colour that come between it and an unchanging background. It does not have a blind...
951
LED Spotlight for Workstation Illumination
- Banner Engineering Lighting and Indicators Product NewsPublished on 19/11/2012, 16:29
High Intensity LED Spotlight for Workstation Illumination from Banner Engineering. When the word "spotlight" is mentioned, it is usually in reference to a person, place, thing, or act worthy of attention. However, the actual spot light is seldom considered. With the new WL50S High-Intensity LED Spot Light, Banner Engineering Corp. introduces a product worthy of the spotlight. As part of Banner's task light line of lighting and indicators, the WL50S is a very bright, sealed spotlight designed for use in general purpose applications. Constructed with three high-intensity LED bulbs, the WL50S Spot Light illuminates a selected area with an even pattern of light and no shadows and has a long-lasting useful life when used within its specifications. Rugged, black anodized aluminum housing...
699
Inductive Linear Position Sensors for Motion Control
- TURCK Sensor Technology Product NewsPublished on 13/11/2012, 07:59
Turck is offering a high-speed inductive linear position sensor for closed-loop control tasks. Turck has entered the market for high-speed motion control, with its latest version of the LI inductive linear position sensor. A new electronic architecture increases the effective output rate of the sensor from 1 to 5 kHz. In conjunction with the short signal run time (130 µs) and the highly resolved SSi output, the inductive linear position sensors can thus achieve the performance of potentiometers but without their disadvantages. Unlike potentiometers, the LI sensors offer protection to IP67, provide non-contact measuring and are absolutely wear-free. The magnetic field immune sensors are therefore suitable for measuring axes with high-speed controls such as is used in injection...
576
Miniature Magnetic Field Sensor for Short Stroke Cylinders
- TURCK Sensor Technology Product NewsPublished on 12/11/2012, 16:20
Turck offers the shortest magnetic field sensor on the market in the form of the BIM-UNTK miniature magnetic filed sensor for short stroke sylindersTurck have announced the BIM-UNTK, the shortest magnetic field sensor in this sector for detecting the piston position in compact pneumatic cylinders. The sensor is suited to short stroke cylinders, with an overall length of only 19.7 mm and is ideal for measuring particularly short hydraulic cylinders, pneumatic power clamps and grippers. The user not only benefits from increased switch point accuracy but also from the extremely compact mounting form: The sensor disappears completely in the T groove and thus does not present a target for any mechanical damage. An LED on the sensor enables the cylinder position to be read directly in the...
706
Fully Programmable 3D Inclinometers
- TURCK Sensor Technology Product NewsPublished on 08/11/2012, 16:35
First 2x360° inclinometer that can be individually adjusted by the customer to suit every application. With the B2N-360-Q42, Turck has developed a 3D inclinometer that can be adapted extensively and precisely by the customer to the requirements of the application via IO-Link. With a double 360° measuring range, the sensor is not limited to a maximum ±85° – as with all comparable models. Users can not only set individual vibration filters that precisely mask out the vibration frequency of your machine, but also define the zero point, switch points or switch windows – according to the mounting position and requirements at hand. As well as vibrations, the sensor also suppresses potential error sources such as accelerations or shocks. The extensive range of assignable parameters and...
625
iVu Bar Code Reader (BCR)
- Banner Engineering Vision Sensors and Vision Lighting Product NewsPublished on 24/10/2012, 19:14
Banner Engineering Corp. introduces the iVu Bar Code Reader (BCR), the first industrial touch screen bar code reader. The iVu BCR reads 11 industry-standard bar codes to facilitate advanced traceability—a critical strategy for ensuring highest product quality in packaging, material handling, pharmaceutical and many industrial applications.
Sharing the same integrated touch screen design as the first iVu series model—the iVu TG Image Sensor—the iVu BCR allows users to efficiently configure, monitor and modify an inspection on-site. The iVu BCR deciphers bar codes of varying types to verify correct content at production speeds of hundreds of parts per minute—all within a single compact, rugged package.
After introducing the iVu TG Image Sensor in early 2009, we gathered customer feedback...
515
Magnetic Field Sensors at Reed Switch Prices
- TURCK Sensor Technology Product NewsPublished on 01/10/2012, 16:01
Wear free and shock resistant magnetic field sensors at the price of a reed switch. As an economic alternative to magnetic field sensors with reed contacts, Turck offers the BIM-UNT-AP7X. Although both versions meet on a comparable price level, the BIM-UNT is wear-free and shock resistant. The BIM-UNT can detect all magnets in standard pneumatic cylinders safely and without multiple switch points. With a total length of only 28 mm, the BIM-UNT is one of the most compact sensors on the market. The active faces are located directly at the sensor end and thus enable a safe detection of the piston rod up to the end position at the compact short-stroke cylinder. The vibration-resistant fixation of the screw near the cable routing prevents an uplift of the sensor when pulling the...
629
Turck's RI angle sensors allow application-specific teach process in the field
- TURCK Sensor Technology Product NewsPublished on 28/09/2012, 15:54
Inductive RI Angle Sensor. Turck has added new functions to its range of RI inductive angle sensors. From now on, users can teach the RI sensors directly at the device. Not only is it possible to call up hard programmed angle ranges, but start and end points can also be defined for the sensors as required. Furthermore, the rotation direction can also be selected as required. The sensors were developed for use in mobile devices in accordance with the e1 specification. On the RI sensors, the angle position is not measured with a magnetic positioning element, but by means of an RLC circuit. This sensor is thus completely immune to magnetic fields, such as for example those of large motors.
The RI sensors have a measuring range of 360° with an accuracy of 0.15 percent of full scale....
566
Q26 Clear Product Detector
- Banner Engineering Sensor Product NewsPublished on 25/09/2012, 22:08
Banner Engineering Corp. introduces the Q26 Series photoelectric sensor to its line of clear object detection sensors. Featuring a polarized retro coaxial design, the Q26 is an ideal solution for difficult clear object detection applications, such as filling and bottling machines, flat glass or LCD manufacturing, pharmaceutical vials or bag filling machines, or any high-speed application where positioning is critical. With its compact cubic shape and coaxial optics, the Q26 is able to fit in tight locations. The cubic shape with 20 mm mounting hole spacing enables quick installation in tight spaces, and the coaxial optics allows the sensor to operate over a wide range of distances with the reflector mounted as close as 5 mm for space constrained applications."Banner has several sensors...
784
TL50 LED Beacon Light
- Banner Engineering Lighting and Indicators Product NewsPublished on 25/09/2012, 21:51
Attention-getting equipment status signals in industrial environments are paramount to overall factory productivity. With manufacturing efficiency in mind, Banner Engineering Corp. introduces the new EZ-LIGHT TL50 Beacon Tower Light — a hybrid of Banner's popular TL50 Tower and K50 Beacon lights, to its existing line of lighting and indicators. Like other models of the TL50, the new Beacon Tower is segmented and may be ordered with 1-4 different coloured LED lights, thereby allowing several messages to be conveyed at once. The new TL50 also features the ability to have any of the segments flash or rotate their extremely bright signals in addition to displaying a solid ON indication.
"We see tower lights as an important solution for so many industrial applications, and our new...
547
Banner WORLD-BEAM QS30 Water Sensors
- Banner Engineering Sensor Product NewsPublished on 18/09/2012, 21:52
Banner WORLD-BEAM QS30 Water Sensors Solve Challenging Liquid Detection in Clear, Frosted or Colored Containers
Banner Engineering WORLD-BEAM® QS30H2O Opposed Mode Water Sensors provide an innovative solution for efficiently detecting water-based liquids in clear, frosted, colored or even partially opaque bottles or containers. QS30 Water Sensors use a specially designed 1450 nm sensing beam, which is inherently absorbed by water, to make the previously challenging clear bottle/clear water combination detection a high-contrast application, enabling reliable detection. In addition, QS30 Water Sensors have high excess gain to “burn through” coloured glass, labeled/decorated bottles and translucent milk jugs to detect the liquid contents.
QS30 Water Sensors consist of an emitter and a choice...
553
High Intensity LED Indicator Lights
- Banner Engineering Lighting and Indicators Product NewsPublished on 18/09/2012, 15:50
Banner presents five new daylight visible EZ-Light models. Banner introduces five new EZ-Light high intensity indicators to provide clear long-range visibility in intense sunlight or brightly lighted indoor conditions. All use advanced LED technology to provice longer live and lower energy consumption than fluorescent of incandescent light sources.
The K50 Beacon provides high intensity light viewable through fog or mist from around the entire perimeter for traffic or entry gate control in carwash or parking facilities. Preassembled traffic lights with as many as three different-colored lights stacked in each housing, provide cost effective traffic signaling in indoor or outdoor situations. Field of view is controlled for use in narrow lanes. Slimmer than traditional stack...
569
Wireless Q45 Sensor—Remote Device Model
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 11/09/2012, 15:32
Banner Engineering Wireless Q45 Sensor. Remote Device Model Provides Unprecedented Interface Flexibility for Dry Contact Applications. Banner Engineering announces the SureCross® Q45 Remote Device (RD) model, the latest addition to the company's line of wireless sensors. The Q45 RD model is capable of interfacing with isolated dry contacts or PNP outputs, allowing the RD to interface with almost any digital sensor. It also features a mode where it interfaces directly with NAMUR inductive proximity sensors.
In addition to superior flexibility, the RD model delivers the longest lifetime of all Q45 sensors. The Q45 RD model operates on less than 100uA of current, allowing the battery to last up to five or more years depending on the application.
"The RD model extends...
617
WORLD-BEAM® QS18 Adjustable-Field Laser Sensors
- Banner Engineering Sensor Product NewsPublished on 14/08/2012, 22:32
WORLD-BEAM® QS18 Adjustable-Field Sensors Now Available with Visible Class 2 Laser for Enhanced Sensing Capability Banner Engineering announces the latest addition to their versatile family of WORLD-BEAM® sensors, the QS18 Adjustable-Field Sensor with a Class 2 laser (QS18LAF250). The QS18LAF250 provides increased sensing capabilities with a cutoff range of 50 to 250 mm. It also offers reduced excess gain within 20 mm of the sensor, making it less susceptible to the effects of lens contamination in challenging industrial environments. The QS18LAF250 delivers reliable background suppression sensing.
WORLD-BEAM QS18 sensors feature outstanding optical performance and excellent sensing repeatability in a universal compact sensor package. The QS18LAF250 has a narrow effective beam...
521
FLEX - Power Supply units from ADELSYSTEM
- ADELSYSTEM Product NewsPublished on 02/07/2012, 22:30
The FLEX range of rail mount Power Supplies is available with 1, 2 and 3-phase input, up to 500W, and with current rating ranging up to 25A and a power flexibility that reach the 50% of the rated current In. The ambient temperature rating allows for operation up to 60°C.
Adel power supplies featuring three modes for output protection, (Hiccup Mode, Manual Reset and Continuous Output mode), the extremely small sizes of the units and the appliance to the EN 60204-1 Safety of Electrical Equipment Machines, changes the way to supply power to control panels. Besides the 1-phase 115-230Vac units, Adel also offers 2-phase 230-500Vac units, which can help reduce inventory with one product suitable for many input voltages.
Features of the Adel Flex power supplies include -
Competitive...
2151
360 Degree Angle Sensor for Rotary Actuators
- TURCK Sensor Technology Product NewsPublished on 29/06/2012, 22:23
360 Degree Angle Sensor for Rotary Actuators. With the new RI-DSU35 device series, Turck's inductive resonant circuit measuring principle is being implemented for the first time in a dual sensor design for analog angle measuring on rotary actuators and valves. The automation specialist is thus also offering its interference-immune angle measuring principle for the optimized detection of valve and flap positions. Unlike with the conventional dual sensor, the user can select the switch points as required from the entire rotation range from 0 to 360 degrees. This eliminates the need for any time consuming setting and readjustment of the actuating element.
Turck is planning to offer the series with an output signal from 0…10 V or 4…20 mA from the fourth quarter of 2012. Intrinsically safe...
541
Banner R-GAGE QT50R Sensor
- Banner Engineering Sensor Product NewsPublished on 26/06/2012, 22:22
Banner R-GAGE QT50R Sensor Resists Wind, Rain & Extreme Temperatures To Reliably Detect Moving & Stationary Objects
Banner Engineering Corp. introduces the R-GAGE™ QT50R, an advanced radar-based sensor for close and long-range presence detection in a broad range of weather conditions. The QT50R features frequency modulated technology to accurately monitor or detect objects while resisting rain, wind, humidity and extreme temperatures.
The QT50R uses Frequency Modulated Continuous Wave (FMCW) radar to reliably detect moving or stationary cars, trains, trucks and cargo. The QT50R detects target objects up to 15 m away and ignores anything beyond the setpoint. The IP67-rated sensor operates at 24 GHz in the Industrial, Scientific and Medical (ISM) telecommunication band.
“The...
1083
Anti Crane Collision with BANNER's R-Gage
- Banner Engineering Sensor Product NewsPublished on 19/06/2012, 22:16
Banner’s R-Gage Series supports collision avoidance and vehicle detection. An updated series of radar-based sensors with enhanced capability for detecting large objects in challenging outdoor situations has been introduced by Banner Engineering. The R-Gage sensors support collision avoidance and vehicle management applications in container ports, traffic and parking systems, manufacturing, mining, materials handling and railroads.
With expanded distance capabilities, the new sensors can detect objects both farther away from the sensor and closer to it (reducing “dead” zones). The Frequency Modulated Continuous Wave (FMCW) radar provides reliable detection in nearly any weather condition; it is not affected by rain, snow, wind, fog, light, humidity or temperature. It also detects...
840
Safety Switches in Stainless Steel for the Food Industry
- Comitronic-BTI Product NewsPublished on 11/06/2012, 14:45
Safety Switches in Stainless Steel for the Food Industry from Comitronic-BTI. Comitronic-BTI is a French manufacturer of machine safety products and is a world leader in “stand alone”, non-contact, multi coded safety switches. The stand alone Comitronic switches achieve a high level of safety as per ISO13849-1, without use of an additional safety relay. In today’s highly automated manufacturing processes, safety switches are not only required to protect the operator from dangerous machinery, but also to protect the expensive machinery from possible damage caused by the operator.
The switches consist of two parts: a receiver and a transmitter and are mounted on doors and crankcases of dangerous machines. As soon as it opens, the switch stops the dangerous function, until the door...
648
Illuminated E-Stop from BANNER Engineering
- Banner Engineering Machine Safety Product NewsPublished on 15/05/2012, 22:08
Armed, actuated and stop status conveyed by highly visible LED illumination. New from Banner Engineering is the SSA series of E-stop buttons for emergency stop safety applications with bright, highly visible indication. The easy to install E-stops (30mm base mount) are available with two colour yellow and red lighting. EZ-LIGHT™ logic provides an illuminated yellow base when the button is armed and the machine is able to run or is running, and turns to a flashing red indication whenever the button is pushed. The base of an armed button can also turn to a steady red indication (from yellow) when a stop condition exists by supplying an external signal. Various contact configurations such as 2 NC, 1 NC/1 NO and 2 NC/2 NO and a PNP NO auxiliary output are available in the IP65...
662
SLN-44 Preset Counter from SIMEX
- Simex Product NewsPublished on 09/04/2012, 21:53
New from Simex, the SLN-44 series, a DIN 48 x 48 electronic preset counter with a Blue STN LCD display with white backlight. The display is 6 digits dual layer, divided into Main display and Sub-display. The main display has a 10 x 5 mm figure size showing the count value and the Sub-display shows the preset values. Included in the display are Preset level indicators and Output indicators which can be toggled by a push of a button.
The SLN-44 series is available in 1 or 2 level preset or 1 level + Pre-warn type which makes it an ideal counter for general counting or total/batching counting applications. It is 100-240V AC or 12-24V DC powered and has an external power supply of 12V DC for sensors.
The SLN-44 can count bidirectional (Quadrature), Add, Subtract or Add/Subtract and upon...
705
New DF-G1 Expert Fibre Optic Photoelectric Sensor
- Banner Engineering Sensor Product NewsPublished on 04/04/2012, 21:41
New DF-G1 Expert handles small part detection and low contrast situations. A dual display fibre optic amplifier that can be easily programmed for a wide range of applications and conditions has been introduced by Banner Engineering. The new DF-G1 Expert has two easy-to-read digital displays showing signal level and threshold simultaneously for simple operation and pinpoint accuracy. Its expert “teach” and “set” methods allow users to modify response time, signal level and sensitivity. This flexibility allows the unit to support many sensing needs, including low contrast situations, small object detection and parts in place verification.
The 10 mm wide amplifier is designed for use on machines performing part detection in packaging; electronic assembly; pill, caplet and syringe...
571
Flexible Angle Sensors from TURCK
- TURCK Sensor Technology Product NewsPublished on 29/03/2012, 21:34
Turck's RI angle sensors allow application-specific teach process in the field. Turck has added new functions to its range of RI inductive angle sensors. From now on, users can teach the RI sensors directly at the device. Not only is it possible to call up hard programmed angle ranges, but start and end points can also be defined for the sensors as required. Furthermore, the rotation direction can also be selected as required. The sensors were developed for use in mobile devices in accordance with the e1 specification. On the RI sensors, the angle position is not measured with a magnetic positioning element, but by means of an RLC circuit. This sensor is thus completely immune to magnetic fields, for example, those of large motors. The RI sensors have a measuring range of 360° with an...
522
Application optimised RFID Components
- TURCK Identification Systems Product NewsPublished on 21/03/2012, 21:25
Combined heads and tags for applications in the food and high temperature sector, Turck opens up further fields of application for the RFID-System BL ident RFID from Turck. Turck enhances its RFID-system BL ident about application-specific combined heads and data-carriers (tags) for the meat industry. A special tag for high-temperature applications completes the program. The new combined head TNSLR-Q42TWD with associated tag was developed especially for applications in wet environments with an increased range-requirement, where the UHF-technology doesn’t work. The head is based on the proven 13,56MHz-HF-technology, but reaches the usual ranges by a factor of three. In connection with Turcks 12mm-data carriers, that is how maximum distances of 35 mm can be realized instead of the usual...
518
ALL-IN-ONE DC UPS from ADEL SYSTEM
- ADELSYSTEM Product NewsPublished on 20/03/2012, 21:17
“All-In-One” D.C. Uninterruptible Power Supply Solution. New from Adel System is the “all in one” family of uninterruptible DC power supplies. The product offers reliable, consistent backup of the DC supply, and should be incorporated where frequent power outages or dips occur. These products are particularly useful where there is a PLC or other digital communication. The DC UPS prevents the system from falling over due to power failures and negates the need to continuously re-boot the system. The time lost in production, while bringing the system back up and restoring all communication, can amount to vast sums of money.
The “all in one” DC UPS consists of three devices – the power supply, battery charger and backup module.
The...
737
Banner EZ-SCREEN® Low-Profile Safety Light Curtain Sensors Now Feature Integral Muting
- Banner Engineering Machine Safety Product NewsPublished on 05/03/2012, 21:06
Banner Engineering Corp. introduces the EZ-SCREEN Low-Profile Safety Light Curtain with Integral Muting, a control reliable, Type 4 Category 4 PLe machine safety product. Low-profile safety light curtains have long been a staple of Banner's machine safety product offerings and are designed for use on smaller production machines, yet are robust enough for large power presses. The rollout of the new integral muting models extends the existing EZ-SCREEN family to provide additional hookup options and functionality — all at a lower cost.
"Space definitely comes at a premium in today's industrial environment, not to mention the resources for safeguarding," said Mike Carlson, Technical Manager for Banner's Safety Products. "Fortunately, the EZ-SCREEN LPM with integral muting provides an...
843
SureCross MultiHop Radios with I/O Form Self-Healing, Auto-Routing Radio Networks
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 15/02/2012, 20:41
Banner Engineering Corp. introduces new SureCross™ MultiHop radios with I/O to its comprehensive line of industrial wireless products. Banner's SureCross MultiHop radios easily connect to existing plant-wide control systems to communicate with input and output devices. The MultiHop radios are an ideal solution for remote applications such as lift station control, large-scale irrigation automation, detention pond management and other areas where line of sight is not possible due to difficult terrain.
"MultiHop Radios with I/O were designed to easily extend the range of an existing wired network and to expand the reach of process control without the need for lengthy cable runs," said Chris Dales, Wireless Sales Manager at Banner Engineering. "It is also important to note that our MultiHop...
582
K50 Beacon LED Light Now Available in Flashing, Rotating Models
- Banner Engineering Lighting and Indicators Product NewsPublished on 03/02/2012, 20:40
Not long after Banner Engineering Corp. introduced the K50 Beacon Light, work began on enhancing the general purpose indicator in order for it to provide even more solutions. As a result, the K50 Beacon Light is now available in rotating and strobing models that will radiate an extremely bright, attention-getting signal with its intense LEDs. In addition to featuring a light viewable from all directions, the strobing K50 models emit light from the top and have three functions — solid ON, single and double strobe. Meanwhile, the rotating version is also available with three functions — solid ON, as well as two rotating speeds. The K50's microprocessor-based design allows Banner to quickly offer custom configurations on the strobe rates and rotation speeds, thus helping meet specific needs of...
504
WLS28 LED Work Light Strip
- Banner Engineering Lighting and Indicators Product NewsPublished on 03/02/2012, 20:33
Banner Introduces Several Enhancements to WLS28 Work Light Strip. When Banner Engineering Corp. first developed the WLS28 Work Light Strip, the goal was make a task light that provided even, bright, highly efficient white LED illumination to enclosures and other areas with poor lighting conditions. Having supremely achieved that goal, the WLS28 has since evolved and now offers a number of significant enhancements and purchase options, making it a dynamic part of Banner's line of lighting and indicators.
Banner's new WLS28 models are now available in the following:
Six different colors (cool and warm white, red, green, blue, and yellow)
Standard or push button on/off
Sealed IP67/IP69K or unsealed IP50
Cascadable or non-cascadable
Clear or diffused plastic windows
"We're...
599
K50BL LED Beacon Light
- Banner Engineering Lighting and Indicators Product NewsPublished on 28/12/2011, 16:47
Banner Engineering Corp. introduces the K50 Beacon Light to its line of lighting and indicators. By providing intense levels of light from all directions, the new beacon light is designed to be a solution where high brightness is needed, including both indoor and outdoor environments. The beacon light may be used for any number of applications, including general status indication, and is ideal for areas with high levels of ambient light that would normally wash out a standard indicator light. The K50 is rugged and sealed in a thermoplastic housing rated for IP67 and IP69K. Perimeter and top view models are available, as are cabled and Quick Disconnect models. The K50 Beacon Light is available in single colour models (Green, Red, Yellow and Blue) as well as a two colour version (Green / Red)....
1078
EZ-SCREEN LP Safety Light Screen
- Banner Engineering Machine Safety Product NewsPublished on 26/12/2011, 21:16
Banner EZ-SCREEN LP Safety Light Screen Delivers Low-Profile Design and Continuous Detection Across Entire Screen Length
Banner Engineering Corp. has expanded its EZ-SCREEN® family of safety light screens to include low-profile models, which pair a space-saving footprint—ideal for safeguarding of smaller machines—with reliable performance suited even for large power presses. The first and last beams of the new EZ-SCREEN Low Profile (LP) are positioned at the ends of the light screen, delivering continuous detection along the entire light screen length and eliminating the dead zones found on traditional safety light curtains.
"In many safeguarding applications, space can be limited," said Mike Carlson, Technical Manager for Banner’s Safety Products. "In these cases, the safety light screen...
534
CLEAR OBJECT SENSOR
- Banner Engineering Sensor Product NewsPublished on 26/12/2011, 16:54
CLEAR OBJECT SENSOR WITH AUTOMATIC ADAPTIVE SENSING DETECTS TRANSPARENT, TRANSLUCENT OR REFLECTIVE OBJECTSNew QS30ELVC Series from Banner Engineering features 500 microsecond response timeA high-performance sensor that detects and counts clear, translucent or opaque objects has been introduced by Banner Engineering. The optical design of the new QS30ELVC Series assures accurate sensing performance with irregularly shaped objects and those with mirror-like surfaces. With a 500 microsecond response time, it is ideal for high speed bottling lines. The housing is designed for use in harsh environments.Typical Applications:Applications include food and beverage bottling and packaging, detection and verification of clear plastic bags containing pharmaceutical and other products, semiconductor...
433
T-GAGE™ temperature sensors
- Banner Engineering Sensor Product NewsPublished on 25/12/2011, 22:18
Banner Engineering’ updates the popular T-GAGE™ temperature sensors. These passive, non-contact temperature-based devices detect objects that are either hotter or colder than the ambient condition and then trigger an output. They are extremely easy to set up because they use Banner’s advanced TEACH-mode push-button programming that requires no potentiometer adjustments.
Joe Dolinsky, Banner’s Magnetic and Temperature Sensor Product Manager stated, “Thanks to advances in manufacturing and reduced costs of thermopile components, Banner temperature sensors offer a low-cost, robust solution to what once was an expensive sensing challenge. Applications. T-GAGE sensors are especially useful for monitoring production lines. They operate even if the product isn’t...
579
BL67 – THE NEXT GENERATION OF SYSTEM I/O
- TURCK Fieldbus Technology Product NewsPublished on 25/12/2011, 19:03
TURCK announces their new BL67 system I/O. The BL67 solution combines all the flexibility of in the cabinet PLC I/O systems with modularity, ruggedness, and connectorization. The BL67 product family complements exiting AIM™, BL20, and piconet® products to meet the needs of unique applications, such as small machine or conveyor systems requiring IP67 protection.
The BL67 system is made up of a gateway, base modules, and electronic modules. The I/O modules are not dependent on the fieldbus protocol. The gateway coordinates the entire I/O data exchange and generates detailed diagnostic information for the control platform. Gateways are currently available for DeviceNet™ and PROFIBUS®-DP. The BL67 system also offers group, connector, channel and module...
558
THE NEW QF5.5 CAPACITIVE SENSOR DESIGNED SPECIFICALLY FOR THE SEMI-CONDUCTOR MARKET
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 18:50
TURCK has redesigned their standard QF5.5 capacitive sensor specifically for the semi-conductor market. The BC10-QF5.5-AP(N)6X2/S932 has a covered potentiometer and an all-plastic (polypropylene) housing that provides a capacitive solution to the unique applications found in the semi-conductor industry.
Metal is not allowed inside the process area of a typical semi-conductor facility, yet the level applications located in these areas require a potentiometer to adjust to the various liquids. The BC10-QF5.5-AP(N)6X2/S932 sensor provides a solution by installing a plastic potentiometer cover that can be removed for adjustments, and seals the metal potentiometer from the process area. By replacing the metal mounting...
984
RFID complete package
- TURCK Identification Systems Product NewsPublished on 25/12/2011, 18:39
Comprehensive high-temperature identification solution enables use up to 210 °C Turck the sensor, fieldbus and interface specialist has extended its product range with a comprehensive RFID solution. The new BLident product series is based on the modular I/O system BL67 (field mountable) and BL20 (control cabinet mounting) and consists of data carriers, read-write heads, connection technology and gateways. In addition to the standard data carriers which are rated for temperatures up to 120 °C, BLident also operates with high temperature tags up to 210 °C. Accordingly, the data carriers can be used for example when curing paint shops in car manufacturing as they can pass through the oven on the vehicle skids. The tags are available with EEPROM and FRAM memory where the latter allows almost an...
487
Factor 1 inductive sensor in Q12 housing
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 18:30
Turck presents the highly complex uprox+ sensor with 5 mm switching distance for mounting and handling applications
Turck has extended its range of uprox+ sensors especially for uses in mounting and handling applications: The sensor specialist presented the inductive Factor 1 sensor in the standardised miniature Q12 (40 x 26 x 12 mm) housing at the Motek. The new flush rectangular housing Q12 offers the highest switching distance currently available on the market – of just 5 mm – and thus guarantees a high system availability. The Q12 is optionally available with a miniature M8x1 connector, with an M12x1 connector or with a direct PUR cable connection option.
In addition to the very compact housing design, the new uprox+ family member has a further feature which is starting to play an...
883
Convenient solution for pneumatic cylinders
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 18:22
Turck extends the BIM-UNT product family with new versions of magnetic field sensors for the detection of pistons on pneumatic cylinders.
The sensor, fieldbus, connectivity and interface specialist Turck have released new magnetic field sensors for the detection of pistons on pneumatic cylinders. The new sensors extend the recently announced BIM-UNT product family. The BIM-UNT can detect all magnets in standard pneumatic cylinders safely and without multiple switch points.
Turck’s new BIM-UNT versions can be customised to customer’s specific applications. Apart from the standard models with cable exit, Namur versions are available for the application in explosion hazardous areas, as well as versions with direct M8/M12 connectors at the housing and a pair-set with two sensors on one M12...
449
Compact interface modules
- TURCK Interface Technology Product NewsPublished on 25/12/2011, 18:13
Turck presents IMS family with complete galvanic isolation for signal conditioning and temperature detection
Turck extends the product portfolio in the field of interface technology with the Interface Module Small (IMS) featuring a width of only 6.2 mm. The IMS is suited for galvanic isolation, signal conditioning and temperature detection in numerous application areas of process and factory automation.
The input, output and power supply (up to 2,5 kV) of the new IMS family are each completely galvanic isolated. The portfolio consists of one and two-channel devices for galvanic isolation without signal conditioning and different models with signal conditioning functions, like dead-zero to live-zero signals. The analogue signal transmitter for example achieves 0.1% accuracy of full...
966
BCC capacitive sensor series
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 18:07
TURCK introduces the new BCC capacitive sensor series, specifically designed to provide accurate level detection in the plastic industry. The BCC series features excellent EMC and ESD immunity, allowing it to reliably detect the level of plastic pellets in a hopper while withstanding environmental interference. BCC sensors are mounted on a plastic sight glass or in the hopper containing plastic pellets for point level detection. “Standard capacitive sensors used to detect plastic pellets are prone to failure because of the electrostatic discharge frequently found in pellet silos and systems,” says Melissa Schumann, product specialist with TURCK’s sensor division. “The BCC series has been specially designed to resist ESD.” These innovative sensors may also be mounted directly in a metal...
638
WIM sensors with 200 mm measuring range
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 18:00
New analogue sensors combine high measuring range with high accuracy
Turck extends its portfolio of linear position sensors with a new magnetic field sensor providing a measuring range of up to 200 millimetres. Thanks to Hall Effect chains, the WIM200 sensor in its new Q25 housing provides the highest linearity and accuracy over the entire measuring range. This feature allows the sensor to be used in applications that demand highly accurate output signals over long measuring ranges, like pneumatically powered pumps, slides, presses or die cutters. For convenient assembly on a large number of applications, Turck offers a great variety of mounting accessories.
The analogue position sensors can help to implement variable area flow meters or level monitoring devices into process control...
820
Factor 1 Sensor Detects Small Targets on Automotive Skids
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 17:52
TURCK introduces the new IP 68 rated, 80 mm rectangular Ni75U-Q80 uprox ®+ sensor –specifically designed for sensing small targets, especially those on automotive skids. This rugged sensor features excellent EMC immunity, making it ideal for use in automotive manufacturing environments. The Ni75U-Q80 sensor additionally offers switching distances up to 75 mm, as well as flexible mounting configurations.
TURCK’s uprox+ factor 1 sensors detect all metals at the same rated distance and feature extended range capabilities – even when embedded in metal. The Ni75U-Q80 sensor facilitates single-sided mounting on a rear metal wall, or it may be fully embedded, delivering a 40 mm switching distance when surrounded by metal on all four sides.TURCK is an industry leader providing superior quality...
463
New Flat Pack Noise Immune Capacitive Sensor
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 17:45
TURCK introduces a new noise immune and easy to apply capacitive sensor for level applications. The BCF10 sensor’s small size makes it more flexible for mounting in level applications, and it has the ability to detect liquids with high concentrations of chlorides, such as soaps and cleaners.“TURCK’s noise immunity technology has been used in barrel style sensors for years, but has recently been retooled for a flat pack housing,” notes Melissa Schumann, product specialist with TURCK’s sensors division. “In applications where a detergent high in chlorides is used, it is typically contained in a plastic container. Over time, the detergent leaves a film or etch on the inside wall of the container. If a standard capacitive sensor is used for level detection, it will detect this film even though...
446
Sensors that can Differentiate Between Metals by TURCK
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 17:39
TURCK has enhanced the functionality of its analog+ proximity sensors to differentiatebetween the types of metal being detected—independent of the distance from the sensor. Available in ring and flat housings that can provide up to 11 mm of sensing range, these sensors function well in stamping, die cutting and metal sorting applications where different metal types are frequently found.The analog+ material detection sensors use inductive coils whose RF fields are influenced differently for each metal type. The signal difference is then converted into a 0 to 10 VDC analogue signal to signify which type of metal is being detected. Additionally, a wide operating temperature rating of -10 to 70°C makes these sensors particularly useful in cold rolling mills that draw seamless pipes.TURCK is an...
468
Mini magnetic field sensors for the smallest cylinders
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 17:34
Smaller than a match, Turck’s new BIM-UNR sensor still provides an LED and a mounting screw
Turck extends its range of magnetic field sensors with a new, fully electronic baby-sized sensor for position detection on even the smallest pneumatic cylinders. With a height of only 4.6 mm and a total length of only 18 mm, the BIM-UNR is perfectly suited for all current rounded groove cylinders. Mounting this compact sensor is as easy as can be: Simply insert the sensor into the groove from above and clamp it via the integrated 1.5 mm hexagon socket thumb screw. A quarter-turn is all it takes. The vibration-proof mounting close to the cable outlet keeps the sensor from lifting if the cable is moved.
Being completely countersunk in the groove, the new BIM-UNR is totally protected, and does not...
431
Pressure sensor for hydraulic applications
- TURCK Sensor Technology Product NewsPublished on 25/12/2011, 17:27
Rugged PS300 pressure sensors provide high precision and applicability based on open standards
Turck has introduced a new line of pressure sensors with integrated evaluation units. The rugged, IP69K rated PS300 sensors provide a wide measuring range from -1 to 600 bar, and are perfectly suited for hydraulic applications – even in harsh environments. Measuring signals are directly processed on the PS300’s newly developed high-build pressure measuring cell and digitally transferred to the fully encapsulated evaluation unit. This design offers a high level of EMC resistance and an excellent switch point accuracy of 0.5 percent of the full scale.
The PS300 sensors are available in G1/4“ female thread versions, or in male/female 1/4“-NPT or R1/4“ versions with digital or analog (voltage or...
466
D10 pill counter fiber optic sensor
- Banner Engineering Sensor Product NewsPublished on 20/12/2011, 21:06
Banner Fiber Optic Sensor Counts Small Objects—Such as Pills, Seeds, and Miniature Components—Quickly and Accurately
Banner Engineering Corp. introduces the D10 Expert™ Small Object Counter, delivering high-performance small object counting to solve a variety of applications, including:
Pharmaceutical pill, tablet and gel cap counting
Agricultural seed counting
Process verification
Verifying product flow from the nozzle of a chute
The Small Object Counter consists of a specialized D10 Expert sensor paired with preconfigured PFVCA fiber optic arrays, creating a two-dimensional sensing field in which objects are readily detected upon breaking any point of the array. This arrangement makes alignment easier and object positioning control less critical than with traditional,...
1452
R58 Registration Mark Sensor
- Banner Engineering Sensor Product NewsPublished on 12/12/2011, 22:57
ONE SENSOR DETECTS ALL REGISTRATION MARKS ON HARD-TO-READ SURFACES
Banner Engineering Corp. has introduced their R58 Expert™ Series colour register mark sensors for detecting colour contrast in common product and material registration applications. The R58 Expert accurately detects 16 levels of gray scale by automatically selecting the sensor’s red, green or blue LED, based on the contrast of the background and the registration mark being sensed. Its ability to perform up to 10,000 actuations per second, coupled with its small 1.2x3.8 mm sensing image, makes the R58 Expert an ideal solution for detecting small, inconspicuous marks in low-contrast, high-gloss sensing applications. All models feature Banner’s advanced TEACH-mode push-button programming for easy...
849
Banner Surcross DX70 Wireless system
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 27/12/2010, 20:59
Deliver a low-cost dedicated wireless industrial I/O system, providing directly mapped I/O using a Gateway and Node, each equipped with four discrete inputs and outputs, two analogue inputs and outputs, and link loss output.
DX70 also offers two-way RX/TX communications, in a licence-free band, with full acknowledgement and easy installation, making it a cost-effective, simple to implement solution for remote I/O applications or plant environments where conduit and wiring are impractical. A Node on the DX70 network can be easily deployed and is used to gather information that is concentrated at a DX70 Gateway system controller, which can be located up to three kilometres away. DX70 uses a Frequency Hopping Spread Spectrum (FHSS) protocol and Time Division Multiple Access (TDMA) technology...
450
Banner’s New Vision System Needs No Computer
- Banner Engineering Vision Sensors and Vision Lighting Product NewsPublished on 26/12/2010, 21:37
Machine vision systems don’t necessarily need lots of extra computing power and complex software to carry out difficult inspection tasks. That’s the guiding principle behind Banner Engineering’s new image sensing system, which is designed to be both simple and smart.Called the iVu Series TG, this self-contained image sensing system features a 68 mm LCD touchscreen for factory-floor programming, a 752 x 480 CMOS imager and pattern-recognition software running on a DSP platform. “No PC or any other external equipment is required to set up or operate the system,” says Dan Holste, Banner’s director of vision.With three built-in sensing modes – match, area and area with motion–the iVu doesn’t seem to suffer much from the lack of computer. “It can solve a full range of complex, high-speed...
1073
Banner EZ-LIGHT Tower Lights
- Banner Engineering Lighting and Indicators Product NewsPublished on 26/12/2010, 21:27
Banner EZ-LIGHT Tower Lights Feature Easy-to-Install, Energy-Efficient Indication with an Aesthetic Design Banner Engineering Corp. introduces EZ-LIGHT TL50 Tower Lights for highly visible operator guidance and indication of equipment status. Displaying up to five colours in one tower and allowing multiple colours to be lit simultaneously, these preassembled and preconfigured multi-segment indicators replace conventional stack lights, which often require time-consuming assembly and complex wiring. In addition, models featuring audible alert with adjustable intensity are available for applications requiring sound indication.
"EZ-LIGHT Tower Lights provide significant benefits when highly visible indication is needed," said Chuck Dolezalek, Banner Engineering project manager. "In indication...
514
DX80 Wireless for Zone 0
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 26/12/2010, 20:53
Banner’s DX series allows solutions for various wireless applications – from cable substitution, to complex network solutions, to applications in zone 0
At the recent SPS/IPC/Drives show Banner Engineering presented its complete wireless portfolio for industrial use in the factory and process automation. In addition to its point-to-point solution, DX70, and the network version, DX80, the automation specialist is now offering the new DX99 series with Atex approval for zone 0. A new solar panel providing self-sufficient power supply for external devices completes Banner’s wireless portfolio. The wireless series, developed from the ground up by Banner, is the most comprehensive and most flexible wireless solution for industrial use worldwide. Possible applications include integration of...
465
Single axis inclinometer
- TURCK Sensor Technology Product NewsPublished on 25/12/2010, 17:20
TURCK introduces a new single axis inclinometer sensor for angular tilt detection with an adjustable measuring range of 360 degrees. Inclinometer sensors may be used in a wide variety of industries to solve unique feedback requirements where the customer needs to level platforms, control tilt angle or control a dancer. The new TURCK inclinometer measures angular tilt in reference to gravity. At the heart of the TURCK inclinometer is a MEMS (micro-electro-mechanical system) device that incorporates a micro-electromechanical capacitive element into the sensor that utilizes two parallel plate electrodes, one stationary and one attached to a spring-mass system. Movement causes acceleration that produces deflection in the non-stationary electrode. This results in a measurable change in the...
1064
New principle of measurement - the RI-angle sensor family from Turck allows contactless angle measurement.
- TURCK Sensor Technology Product NewsPublished on 25/12/2010, 17:11
After the success of the inductive linear displacement sensors, LI-series, Turck presents an angle sensor family that works with the same revolutionary measuring principle and unites all the positive qualities of customary measuring systems in one solution. With the new RI-sensors, the position of the angle isn't measured with a magnetic locator any longer but by an inductive resonant circuit. That way the sensor is totally immune to magnetic fields, like those produced by large drives or welding machines. The RI-sensors have a measurement range of 360° at an accuracy of 0,15 percent of the final value. The separated construction of the sensor unit and the locator as well as an offset compensation of ±4 mm guarantees an easy installation and a safe operation of the sensors. The locator can...
975
High Resolution Linear Position Sensors Replace Magnetostrictive and Potentiometer Devices in Industrial Automation
- TURCK Sensor Technology Product NewsPublished on 25/12/2010, 17:05
TURCK’s new LI-Q25 series linear position sensors replace magnetostrictive and potentiometer devices to deliver precise, repeatable measurements in metal processing machines, rolling mills or injection molding machines. Unlike magnetostrictive or magnetic inductive position sensors, LI-Q25 sensors do not require a magnetic positioning device; thus, they are unaffected by metal debris. The sensors provide up to 1 μm resolution and can achieve measuring ranges between 100 and 1,000 mm with analog voltage/current, SSI or I/O Link outputs. The linear position sensor has emitter and receiver coil systems, precisely placed onto a printed circuit board, that are activated with a high frequency AC field and produce an inductive RLC circuit with the positioning element (resonator). As a result, the...
523
Miniature linear displacement sensor
- TURCK Sensor Technology Product NewsPublished on 25/12/2010, 16:58
Turck presents the first inductive miniature linear displacement sensor for a measuring range from 50 to 200 mm, which is using the resonant circuit measuring principle Designed for very short measuring ranges between 50 and 200 mm, Turck has developed the first miniature linear displacement sensor LI-Q17 that unites all the positive qualities of customary measuring systems in one solution without having the disadvantages. The LI-Q17 doesn’t work with a magnetic locator but with the resonant circuit measuring principle, where an object’s position is detected via an inductive oscillating system, consisting of a condenser and a coil. As the only sensor of its kind, the LI-Q17 is able to work reliable where the functionality of a magnetic position device is massively affected by...
1174
Encoders, complete portfolio.
- TURCK Sensor Technology Product NewsPublished on 25/12/2010, 16:46
Turck expands its range of sensors with encoders in different types and designs
To offer its customers the ideal sensor solution, Turck has completed its portfolio with a comprehensive range of encoders. The company now offers magnetic and optical rotary encoders in all categories, from incremental to absolute singleturn, absolute multiturn and analogue output units. Turck now has a comprehensive portfolio, from which the user can apply the most fitting technology for the corresponding application.
Turck offers the new encoders in different calibres. Next to the standard model with 58 mm, there are miniature models of 24 up to 37 mm, as well as models for large hollow shafts with up to 100 mm. Thanks to the robust mechanical construction and the compact die-cast case, the encoders are not...
410
Wireless I/O Components for the Physical Layer
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 28/07/2009, 16:30
Wireless communication enables consistent asset management within the physical layer. New gateways and nodes extend RET’s process automation portfolio and enable users to utilize versatile wireless components within the physical layer. Being approved for ATEX zone 1, the new wireless components allow communication, diagnostics and parameterization of field devices even in explosive environments and/or hardly accessible automation areas like pump regulation, corrosion inspection, or temperature measurement within steam pipes.
The range of signals supported covers analog data and binary contacts as well as frequency signals or digital protocols via RS232 or RS485. For the transmission of a valve’s position, Turck offers a comprehensive solution providing wireless communications and the...
509
Uprox+ Inductive Sensor Switching Distance Extended
- TURCK Sensor Technology Product NewsPublished on 15/07/2009, 15:34
Turck extends switching distances for three uprox+ families. Turck has released three new uprox+ models that offer the highest switching distances currently available for their specific designs. The EG08 sensors allow flush mounting and provide reliable detection of metallic objects over a three mm distance. The switching distance of the only eight mm high Q08 family has been increased to a maximum range of 12 mm (non-flush mounting). And the Q80 sensors guarantee the highest switching distances of up to 80 mm even in harsh automotive environments, like skid-detection.
In addition, the small-sized Q08 plastic sensors and the Q80 models effectively eliminate predamping, thanks to a lateral shielding provided. In this way, the user can utilise the full switching distance even when...
557
Analogue Magnetic Field Sensor
- TURCK Sensor Technology Product NewsPublished on 13/07/2009, 15:14
Compact analogue sensor with a 45 mm measuring range supplies a linear output signal with high precision. Turck has added a compact version with an analogue output to its range of special sensors for pneumatic cylinders. The WIM45-UNTL model allows the position of the piston between the ends of the cylinder to be determined at any time so that penetration depths and stroke motion can be detected precisely. This kind of detection is useful for a large number of applications such as ultrasonic welding, hot air riveting, bolting, pressing, clamping, cutting or for quality control. The new Turck sensor now provides an efficient alternative to wear-intensive and mechanically cumbersome solutions with potentiometers or expensive linear positioning systems.
With a total length of only...
515
Wireless I/O Components from Banner Engineering
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 10/07/2009, 20:21
Wireless communication enables consistent asset management within the physical layer
New gateways and nodes extend RET’s process automation portfolio and enable users to utilize versatile wireless components within the physical layer. Being approved for ATEX zone 1, the new wireless components allow communication, diagnostics and parameterization of field devices even in explosive environments and/or hardly accessible automation areas like pump regulation, corrosion inspection, or temperature measurement within steam pipes.
The range of signals supported covers analog data and binary contacts as well as frequency signals or digital protocols via RS232 or RS485. For the transmission of a valve’s position, Turck offers a comprehensive solution providing wireless communications and the...
672
T30UX Ultrasonic Sensor
- Banner Engineering Sensor Product NewsPublished on 10/07/2009, 15:07
U-GAGE T30UX Ultrasonic Sensors Feature Extended Range..... Banner Engineering Corp. introduces the U-GAGE T30UX ultrasonic sensor for challenging applications. With its extended functional range and advanced temperature compensation, the T30UX sensor withstands hostile environments, providing superior ultrasonic sensing to solve even the toughest application challenges. The T30UX sensor features a robust U-GAGE housing to resist harsh environmental conditions and provides a variety of model options to meet a broad range of application requirements.
The T30UX ultrasonic sensor is available in a choice of three ranges for reliable sensing from 100 mm to 3 m and delivers high-accuracy performance with built-in temperature compensation across a wide range of ambient temperatures....
498
QS30 Clear Object Photoelectric Sensors from Banner Engineering
- Banner Engineering Sensor Product NewsPublished on 22/06/2009, 14:20
QS30 Clear Object Sensors Provide Robust, Easy-to-Use Clear Object Detection. BANNER Engineering Corp. introduces the WORLD-BEAM® QS30 Clear Object Sensor, providing reliable clear object detection to solve challenging applications. The Clear Object Sensor utilizes an advanced optical design to allow the sensor to see translucent materials, ensuring dependable detection of clear targets including PET bottles and glass containers. Additionally, the optical design prevents the sensor from being tricked by specular reflections, allowing the sensor to detect optically engineered surfaces such as mirrors, LCD glass with polarizing films, and semiconductor wafers. "Detecting clear objects is a difficult sensing challenge in many real world situations," said Dennis Smith, Technical...
555
EZ-LIGHT LED Tower or Stack Indicator Lights from Banner Engineering
- Banner Engineering Lighting and Indicators Product NewsPublished on 15/06/2009, 14:06
EZ-LIGHT Tower Lights provide Easy-to-Install and Energy-Efficient Indication. BANNER Engineering introduces EZ-LIGHT TL50 Tower Lights for highly visible operator guidance and indication of equipment status. Displaying up to five colors in one tower and allowing multiple colors to be lit simultaneously, these preassembled and preconfigured multi-segment indicators replace conventional stack lights, which often require time-consuming assembly and complex wiring. In addition, models featuring audible alert with adjustable intensity are available for applications requiring sound indication.
"EZ-LIGHT Tower Lights provide significant benefits when highly visible indication is needed," said Chuck Dolezalek, Banner Engineering project manager. "In indication applications, it's often...
747
TURCK extends the BIM-UNT sensor product family
- TURCK Sensor Technology Product NewsPublished on 20/10/2008, 13:55
With new versions of magnetic field sensors for the detection of pistions on pneumatic cylinders. The sensor, fieldbus, connectivity and interface specialist Turck will present new magnetic field sensors for the detection of pistons on pneumatic cylinders at the 2007 Motek fair. The new sensors extend the recently announced BIM-UNT product family. The BIM-UNT can detect all magnets in standard pneumatic cylinders safely and without multiple switch points. Turck's new BIM-UNT versions can be customized to customer's specific applications. Apart from the standard models with cable exit, Namur versions are available for the application in explosion hazardous areas, as well as versions with direct M8/M12 connectors at the housing and a pair-set with two sensors on one M12 connector.
As an...
562
TURCK expands its IP20 Remote I/O System
- TURCK Fieldbus Technology Product NewsPublished on 13/10/2008, 13:49
With ECO modules and ECO gateway, motor starter, RFID module and programmable gateway. Numerous expansions have completed the Turck BL20 I/O system for Profibus, CANopen, DeviceNet, Ethernet/IP and Modbus TCP. Now available are the new extremely compact Economy modules that can house up to 16 I/Os on only 12.5 mm width. No tools are necessary, thanks to the integrated connectors with push-in spring-balancing technology.
The ECO modules are complemented by the new ECO Gateway for Profibus DP and CANopen, which also celebrates its premiere in Hanover. Additionally to the ECO modules, Turck presents motor starter modules that can control the motors as a direct or reversing starter up to 5 kW with minimal wiring effort.
New RFID modules for incorporating the BL ident system and a...
583
DX99 A Battery-Powered, Intrinsically Safe Wireless Transceiver
- Banner Engineering Wireless Sensor Networks Product NewsPublished on 10/10/2008, 11:33
Introducing the next major step in Hazardous Area Instrumentation. Banner Engineering announced an entirely new way to collect analog, digital and temperature information in hazardous areas. The system is a state-of-the-art combination of wireless communication, battery technology and intrinsically safe electronics.
There are two main methods used today when collecting signals within a hazardous area: explosion-proof and intrinsically safe. Traditional explosion-proof methods work well and have been used reliably for decades, but they are expensive and the installation is time consuming. In the last 20 years, intrinsically safe barriers have reduced some of the cost and complexity. But, both methods still add a significant level of complexity and expense when compared to similar...
505
Contact us Today
Our Address:
RET Automation House
130 Boeing Road East, Bedfordview,
RET Automation House
130 Boeing Road East, Bedfordview,
South Africa, 2007.
Contact Details:
Phone: +27 (0) 11 453 2468
Premicell: 082 201 2209
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Premicell: 082 201 2209
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Monday to Friday - 8am to 4:30pm
RSS FEED
Published in SA Instrumentation & Control
- Energy measurement module for BL20 I/O System
- Status display for conveying sensor, machine and device data
- Inductive IO-Link sensors
- New toolset for Turck Automation Suite
- Condition monitoring to go
- Compact UHF RFID reader with integrated Ethernet interface
- Monitoring voltage continuously
- Magnetic field/temperature sensor with IO-Link
- Powerful measuring sensor with two new modes
- Simplify condition monitoring with one gateway
- Efficiently consolidate analogue signals and reduce wiring
- Farewell to a family legacy
- Robust Ethernet cordset cables
- Maximising machine uptime
- RFID read/write heads and tags in miniature format
Request a Call
We have helped thousands of customers solve their challenging applications, let us help you!
Latest News
- L-GAGE® LTF Laser Measurement Sensor Provides Superior Durability and Precision Measurement
- ADEL System - Flex Power Supply Units
- Turck’s New ARGEE Technology Turns I/O Devices into Field Logic Controllers (FLCs) for Flexible, Cost-effective Control
- Turck presents RFID Device Control Center with integrated data processing for simple data control in Industry 4.0 applications
- RET Offers High-Pressure Resistant Sensors in M12
- M12 Power Connectivity
- DF-G3 Fiber Amplifier Now Available With Analog Output to Satisfy Diverse Sensing Applications
- New RJ45 Patch Cords from RET
RET Automation Controls
Customers First
Integrity Always
Quality in Everything
New Solutions – Every Day
RET Automation Controls provides market leading solutions to the factory automation and process automation markets in Southern Africa. Over the last 30 years RET Automation Controls has been privileged to be able to develop relationships with global leaders in the automation industry, creating a portfolio of complementary products to enable the establishment and maintenance of mutually beneficial long term customer relationships.RET Automation Controls has always ensured that it is supplying products for which it can be proud of and which enhance RET’s reputation as a supplier of high quality innovative products and solutions.
Copyright © 2026. RET Automation Controls.